SPECpower_ssj2008

Low Power Company, Inc. Lopoco LP-4290 Series Server			SPECpower_ssj2008 = 4,342 overall ssj_ops/watt
Test Sponsor:	Low Power Company, Inc.	SPEC License #:	4777	Test Method:	Single Node
Tested By:	Low Power Company, Inc.	Test Location:	Mountain View, CA	Test Date:	Apr 24, 2017
Hardware Availability:	January 2017	Software Availability:	Jan-2017	Publication:	Unpublished
System Source:	Low Power Company, Inc.	System Designation:	LP-4290-8H	Power Provisioning:	Line-powered

WARNING: PTDaemon 1.8.0-3505e615-20160120 is over 12 months old. Check http://www.spec.org/power/docs/SPECpower-Device_List.html to determine if a newer version is available. (see Run Rules Section 1.1)

Benchmark Results Summary

Performance			Power	Performance to Power Ratio
Target Load	Actual Load	ssj_ops	Average Active Power (W)	Performance to Power Ratio
100%	99.8%	291,263	45.0	6,478
90%	89.8%	262,087	47.5	5,520
80%	80.1%	233,759	46.9	4,987
70%	69.7%	203,501	44.8	4,545
60%	59.6%	173,898	41.6	4,181
50%	50.0%	145,919	37.3	3,916
40%	39.9%	116,325	31.7	3,675
30%	29.9%	87,143	25.8	3,379
20%	20.1%	58,520	20.4	2,864
10%	10.0%	29,283	16.2	1,809
Active Idle		0	11.9	0
∑ssj_ops / ∑power =				4,342

System Under Test

Set: 'lp4290'

Set Identifier:	lp4290
Set Description:	System Under Test
# of Identical Nodes:	1
Comment:	1U Single Node Server

Hardware
Hardware Vendor:	Low Power Company, Inc.
Model:	Lopoco LP-4290 Series Server
Form Factor:	1U
CPU Name:	Intel Xeon E3-1260L v5
CPU Characteristics:	Quad-Core, 2.9GHz, 8MB Intel Smart Cache(tm)
CPU Frequency (MHz):	2900
CPU(s) Enabled:	4 cores, 1 chip, 4 cores/chip
Hardware Threads:	8 (2 / core)
CPU(s) Orderable:	1 chips
Primary Cache:	128 KB I + 128 KB D on chip per core
Secondary Cache:	1 MB I+D on chip per chip
Tertiary Cache:	8 MB on chip per chip
Other Cache:	None
Memory Amount (GB):	32
# and size of DIMM:	2 x 16 GB
Memory Details:	32GB 2133MHz DDR4 ECC; slots 2 and 4 populated
Power Supply Quantity and Rating (W):	1 x 110
Power Supply Details:	Lopoco
Disk Drive:	1 x 120GB SSD
Disk Controller:	Integrated SATA3 controller
# and type of Network Interface Cards (NICs) Installed:	2 x Intel I210 Gigabit Ethernet (onboard)
NICs Enabled in Firmware / OS / Connected:	2/2/1
Network Speed (Mbit):	1000
Keyboard:	USB/KVM
Mouse:	USB/KVM
Monitor:	Yes/KVM
Optical Drives:	None
Other Hardware:	None

Software
Power Management:	Enabled (see SUT Notes)
Operating System (OS):	Ubuntu Server amd64
OS Version:	16.10
Filesystem:	XFS
JVM Vendor:	OpenJDK/JIT
JVM Version:	openjdk-9-jre-headless 9~b134-2ubuntu1
JVM Command-line Options:	-XrunFast -XconsumeLessPower
JVM Affinity:	None
JVM Instances:	1
JVM Initial Heap (MB):	Dynamic
JVM Maximum Heap (MB):	Dynamic
JVM Address Bits:	64
Boot Firmware Version:	2.0
Management Firmware Version:	1.35
Workload Version:	SSJ 1.2.10
Director Location:	Controller
Other Software:	None

Boot Firmware Settings

none

Management Firmware Settings

none

System Under Test Notes

No disk backplane
Results produced with a standard installation of Ubuntu Server AMD64 16.10.
Standard/Default BIOS Settings for power management.
No special Java switches used to invoke Java.

Controller System

Hardware
Hardware Vendor:	Low Power Company
Model:	LP-4255-2I
CPU Description:	Intel Xeon E3-1265
Memory amount (GB):	16

Software
Operating System (OS):	Linux
JVM Vendor:	OpenJDK
JVM Version:	7u121-2.6.8-2~deb8u1
CCS Version:	1.2.6

Measurement Devices

Power Analyzer pwr1
Hardware Vendor:	Hioki
Model:	3334
Serial Number:	150526689
Connectivity:	USB
Input Connection:	Default
Metrology Institute:	NIST
Accredited by:	Hioki
Calibration Label:	N-3650
Date of Calibration:	8-Jun-2009
PTDaemon Host System:	same as CCS
PTDaemon Host OS:	same as CCS
PTDaemon Version:	1.8.0-3505e615-20160120
Setup Description:	Unknown

Temperature Sensor temp1
Hardware Vendor:	Digi
Model:	Watchport H/T Sensor
Driver Version:	io_ti 3.16.0-4-amd64
Connectivity:	USB
PTDaemon Host System:	same as CCS
PTDaemon Host OS:	same as CCS
Setup Description:	5mm in front of SUT

Notes

None

Aggregate Electrical and Environmental Data

Target Load	Average Active Power (W)	Minimum Ambient Temperature (°C)
100%	45.0	20.6
90%	47.5	20.7
80%	46.9	20.8
70%	44.8	20.8
60%	41.6	20.9
50%	37.3	20.9
40%	31.7	21.0
30%	25.8	21.0
20%	20.4	21.1
10%	16.2	21.1
Active Idle	11.9	21.1

Line Standard	Minimum Temperature (°C)	Elevation (m)
120V / 60 Hz / 1 phase / 2 wires	20.6	32

See the Power/Temperature Details Report for additional details.

Aggregate Performance Data

Target Load	Actual Load	ssj_ops
Target Load	Actual Load	Target	Actual
Calibration 1			294,913
Calibration 2			291,931
Calibration 3			291,703
ssj_ops@calibrated=291,817
100%	99.8%	291,817	291,263
90%	89.8%	262,636	262,087
80%	80.1%	233,454	233,759
70%	69.7%	204,272	203,501
60%	59.6%	175,090	173,898
50%	50.0%	145,909	145,919
40%	39.9%	116,727	116,325
30%	29.9%	87,545	87,143
20%	20.1%	58,363	58,520
10%	10.0%	29,182	29,283
Active Idle		0	0

See the JVM Instance Performance Report for additional details.

http://www.spec.org - info@spec.org

SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]