Low Power Company, Inc. Lopoco LP-4290 Series Server SPECpower_ssj2008 = Invalid overall ssj_ops/watt
Test Sponsor: Low Power Company, Inc. SPEC License #: 4777 Test Method: Single Node
Tested By: Low Power Company, Inc. Test Location: Mountain View, CA Test Date: May 3, 2017
Hardware Availability: January 2017 Software Availability: Jan-2017 Publication: Unpublished
System Source: Low Power Company, Inc. System Designation: LP-4290-2I Power Provisioning: Line-powered
WARNING: PTDaemon 1.8.0-3505e615-20160120 is over 12 months old. Check http://www.spec.org/power/docs/SPECpower-Device_List.html to determine if a newer version is available. (see Run Rules Section 1.1)
WARNING: PTDaemon 1.8.0-3505e615-20160120 is over 12 months old. Check http://www.spec.org/power/docs/SPECpower-Device_List.html to determine if a newer version is available. (see Run Rules Section 1.1)
INVALID: Power Analyzer "pwr1" had 697 samples with uncertainty exceeding 1.0% out of 1,233 total samples (56.5%) in interval 0, exceeding the threshold of 5.0%. (see Run Rules Section 2.5.2)
INVALID: Power Analyzer "pwr1" had an average uncertainty of 1.2% in interval 0, exceeding the threshold of 1.0%. (see Run Rules Section 2.13.2)
WARNING: Power Analyzer "pwr1" had 4 samples with uncertainty exceeding 1.0% out of 237 total samples (1.7%) in interval 10.
Benchmark Results Summary
Target Load Average Active Power (W) Minimum Ambient Temperature (°C)
Calibration 1 23.9 24.7
Calibration 2 40.9 24.9
Calibration 3 40.4 25.1
100% 40.5 25.1
90% 40.1 25.2
80% 37.3 25.4
70% 34.5 25.4
60% 31.4 25.4
50% 28.5 25.4
40% 25.3 25.5
30% 21.6 25.6
20% 17.8 25.7
10% 13.9 25.8
Active Idle 10.1 25.9
Graph of power and temperature
Measurement Devices
Power Analyzer pwr1
Hardware Vendor: Hioki
Model: 3334
Serial Number: 150526689
Connectivity: USB
Input Connection: Default
Metrology Institute: NIST
Accredited by: Hioki
Calibration Label: N-3650
Date of Calibration: 8-Jun-2009
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
PTDaemon Version: 1.8.0-3505e615-20160120
Setup Description: Unknown
Temperature Sensor temp1
Hardware Vendor: Digi
Model: Watchport H/T Sensor
Driver Version: io_ti 3.16.0-4-amd64
Connectivity: USB
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
Setup Description: 5mm in front of SUT
Notes
None
Power Details for Device pwr1
Target Load Voltage (V) Current (A) Avg Power Factor Avg Active Power (W) Power Measurement Uncertainty (%)
Avg Range Avg Range
Calibration 1 120 150.0 0.246 1.0 0.901 23.9 1.2%
Calibration 2 119 150.0 0.350 1.0 0.978 40.9 0.5%
Calibration 3 120 150.0 0.345 1.0 0.977 40.4 0.5%
100% 120 150.0 0.345 1.0 0.977 40.5 0.5%
90% 120 150.0 0.345 1.0 0.972 40.1 0.5%
80% 120 150.0 0.323 1.0 0.962 37.3 0.6%
70% 120 150.0 0.301 1.0 0.952 34.5 0.6%
60% 120 150.0 0.279 1.0 0.941 31.4 0.7%
50% 120 150.0 0.256 1.0 0.928 28.5 0.7%
40% 120 150.0 0.232 1.0 0.913 25.3 0.8%
30% 121 150.0 0.201 1.0 0.894 21.6 0.9%
20% 120 150.0 0.169 0.3 0.876 17.8 0.5%
10% 120 150.0 0.136 0.3 0.852 13.9 0.6%
Active Idle 120 150.0 0.101 0.3 0.836 10.1 0.7%
Power details for pwr1