Low Power Company, Inc. Lopoco LP-4290 Series Server | SPECpower_ssj2008 = Invalid overall ssj_ops/watt | ||||
Test Sponsor: | Low Power Company, Inc. | SPEC License #: | 4777 | Test Method: | Single Node |
Tested By: | Low Power Company, Inc. | Test Location: | Mountain View, CA | Test Date: | May 9, 2017 |
Hardware Availability: | January 2017 | Software Availability: | Jan-2017 | Publication: | Unpublished |
System Source: | Low Power Company, Inc. | System Designation: | LP-4290-2I | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 96.5% | 344,538 | 44.6 | 7,728 |
90% | 90.1% | 321,559 | 41.6 | 7,733 |
80% | 80.1% | 285,762 | 38.0 | 7,525 |
70% | 69.8% | 248,999 | 34.8 | 7,146 |
60% | 60.0% | 213,970 | 31.8 | 6,726 |
50% | 49.9% | 178,236 | 28.6 | 6,225 |
40% | 40.0% | 142,882 | 25.5 | 5,606 |
30% | 29.7% | 106,114 | 22.1 | 4,798 |
20% | 20.0% | 71,537 | 18.6 | 3,845 |
10% | 9.9% | 35,337 | 14.7 | 2,399 |
Active Idle | 0 | 10.4 | 0 | |
∑ssj_ops / ∑power = | 6,271 |
Set Identifier: | lp4290 |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | 1U Single Node Server |
Hardware | |
---|---|
Hardware Vendor: | Low Power Company, Inc. |
Model: | Lopoco LP-4290 Series Server |
Form Factor: | 1U |
CPU Name: | Intel Xeon E3-1260L v5 |
CPU Characteristics: | Quad-Core, 2.9GHz, 8MB Intel Smart Cache(tm) |
CPU Frequency (MHz): | 2900 |
CPU(s) Enabled: | 4 cores, 1 chip, 4 cores/chip |
Hardware Threads: | 8 (2 / core) |
CPU(s) Orderable: | 1 chips |
Primary Cache: | 128 KB I + 128 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per chip |
Tertiary Cache: | 8 MB on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 32 |
# and size of DIMM: | 2 x 16 GB |
Memory Details: | 32GB 2133MHz DDR4 ECC; slots 2 and 4 populated |
Power Supply Quantity and Rating (W): | 1 x 110 |
Power Supply Details: | Lopoco |
Disk Drive: | 1 x 120GB SSD |
Disk Controller: | Integrated SATA3 controller |
# and type of Network Interface Cards (NICs) Installed: | 2 x Intel I210 Gigabit Ethernet (onboard) |
NICs Enabled in Firmware / OS / Connected: | 2/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | None |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Ubuntu Server amd64 |
OS Version: | 17.04 |
Filesystem: | XFS |
JVM Vendor: | OpenJDK/JIT |
JVM Version: | openjdk-9-jre-headless 9~b161-1 |
JVM Command-line Options: | "-server -Xmn4600m -Xms5500m -Xmx5500m -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=2 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+AggressiveOpts -XX:+UseParallelOldGC -XX:-UseAdaptiveSizePolicy". |
JVM Affinity: | None |
JVM Instances: | 4 |
JVM Initial Heap (MB): | 5500 |
JVM Maximum Heap (MB): | 5500 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 2.0 |
Management Firmware Version: | 1.35 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Low Power Company |
Model: | LP-4255-2I |
CPU Description: | Intel Xeon E3-1265 |
Memory amount (GB): | 16 |
Software | |
---|---|
Operating System (OS): | Linux |
JVM Vendor: | OpenJDK |
JVM Version: | 7u121-2.6.8-2~deb8u1 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Hioki |
Model: | 3334 |
Serial Number: | 150526689 |
Connectivity: | USB |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | Hioki |
Calibration Label: | N-3650 |
Date of Calibration: | 8-Jun-2009 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.0-3505e615-20160120 |
Setup Description: | Connected to SUT PSU |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi |
Model: | Watchport H/T Sensor |
Driver Version: | io_ti 3.16.0-4-amd64 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5mm in front of SUT |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 44.6 | 24.2 |
90% | 41.6 | 24.3 |
80% | 38.0 | 24.7 |
70% | 34.8 | 24.9 |
60% | 31.8 | 24.9 |
50% | 28.6 | 24.9 |
40% | 25.5 | 24.9 |
30% | 22.1 | 25.0 |
20% | 18.6 | 25.1 |
10% | 14.7 | 25.2 |
Active Idle | 10.4 | 25.2 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
120V / 60 Hz / 1 phase / 2 wires | 24.2 | 32 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 344,091 | ||
Calibration 2 | 354,477 | ||
Calibration 3 | 359,256 | ||
ssj_ops@calibrated=356,867 | |||
100% | 96.5% | 356,867 | 344,538 |
90% | 90.1% | 321,180 | 321,559 |
80% | 80.1% | 285,493 | 285,762 |
70% | 69.8% | 249,807 | 248,999 |
60% | 60.0% | 214,120 | 213,970 |
50% | 49.9% | 178,433 | 178,236 |
40% | 40.0% | 142,747 | 142,882 |
30% | 29.7% | 107,060 | 106,114 |
20% | 20.0% | 71,373 | 71,537 |
10% | 9.9% | 35,687 | 35,337 |
Active Idle | 0 | 0 |