************************************************************************* * SMC Networks, INC * * Barricade Broadband Router * * SMC7004VWBR (750.9821) * * FIRMWARE version 1.00.012 * * 10/23/2003 * ************************************************************************* This document contains three sections: A) The upgrade procedure B) The release history for SMC7004VWBR (750.9821) ========================================================================= Section A: Upgrade Procedure ========================================================================= 1. Turn on the router and plug it into your network adapter using port 1 through 4 on the router. 2. Connect to the Web user interface by typing the Barricade's IP Address (ex: 192.168.2.1)in your browser, then click the login button (if you have not already set a password - otherwise enter in the correct password) 3. Click on the "Tools" link, then click the "Update Firmware" option. The "Update Firmware" screen will appear. 4. Click the "Browse" button and point it to the location of the firmware file(7004VWBR_FW_v1_00_012.dlf). 5. Next click "Start" button and follow the prompts. You will notice the lights on the Barricade will react in a certain sequence. Wait patiently while the Barricade performs the following reboot sequence: a. The Power light will flash rapidly. b. The Link lights will come on solid. c. The Link lights will all turn off. d. The Link lights that have a cable connected to them will turn on and blink rapidly. e. The Link lights will return to normal. 6. Your 7004VWBR has now been successfully upgraded. Note: It is recommended that once you upgrade your router with this f/w you reset the unit to factory defaults. ========================================================================= Section B: Firmware History ========================================================================= Post: V0.00.04: 03/12/2003 remove bootline parameter in boot config. V0.00.05: 03/31/2003 port from ADM driver v1.55 V0.00.006. 04/07/2003 port from ADM driver 1.62 which add a workaround to prevent buffer lost V0.00.007 04/11/2003 port from ADM driver 1.63(2003/04/11) to fix double free buffer cause system crash V0.00.008 04/18/2003 update admtek driver 04/18/2003 V1.00.000 rename version number. V1.00.001 05/13/2003 fix recovery page does not work V1.00.002 06/18/2003 Update Admtek’s driver v1.85, and delete debug mode in post code. Runtime code: V1.00.000 05/05/2003 Shipping Version V1.00.001 05/13/2003 1. Fix URL blocking does not work correctly 2. Add Daylight Saving 3. Fix schedule rule turn “\” into “\” 4. Fix schedule rule, after delete an entry, click on apply button will pop-up a window 5. display “12:00 PM/AM” instead of “0:00 PM/AM” in schedule rule page 6. Fix UPNP memory leakage 7. Change the username and password length of e-mail alert from 16 to 41 8. Fix DMZ IP can not be changed 9. NULL probe response 10. Flush NAT routing entry while change WAN mode V1.00.002 05/14/2003 1. Fix schedule rule does not work right 2. Fix MAC filter does not block DHCP server to issue an address 3. Add Day light saving in time-zone page V1.00.003 05/16/2003 1. Fix if user access UI page under heavy traffic in PPTP mode, gateway will crash. V1.00.004 05/19/2003 1. Fix time display, change it from 24 hours to 12 hours AM/PM 2. Fix time clock is not accurate issue. 3. Change the configuration of MAC filter module V1.00.005 05/21/2003 1. Fix schedule rule does not work correctly V1.00.007 06/18/2003 1. Update Admtek driver v1.85 2. Add zone alarm page 3. Add remote management page V1.00.008 07/04/2003 1. Update ADMtek driver 1.87 2. Modify timezone mapping to wireless channel range by spec 3. Add warning message when user select incorrect range of daylight saving in timezone page 4. Fix user can not choose some remote management IP range ex: 192.168.255.2-254 5. Fix when user choose PPTP mode, web don’t show primary and secondary DNS 6. Finish all DDNS page function. 7. Add Debug code for DHCP client can not obtain IP address from Cisco Router V1.00.009 08/07/2003 1. Change timeout time for count license user, so that gateway’s count license function can send challenge packet with correct user number who are using gateway’s license. 2. In the Help Page, added the description of DDNS. 3. New functions should be added into Help page. 4. In TimeZone page, the customer server should not allow user to enter invalid value. 5. In ZoneAlerm page, change setting will cause Ui hang up. 6. Fix Access control where only the first entry can work correctly. 7. Fix Wizard PPTP page, user press apply will be returned error message. V1.00.010 08/12/2003 1. Fix license count not being enforced (ZoneLabs) V1.00.011 08/28/2003 1. Use ADMtek wireless driver v1.91 2. Change "Buy ZoneAlarm Pro Now!" URL link in zap_config.htm 3. Change the mail alert content 4. Add checking IP range in dns proxy filter when user setting dns packet should be dropped. 5. Filtering both TCP 53 and UDP 53 packets when user setup dns packet should be filtered. DNS packet not only UDP type , but also TCP type as well. 6. Add IP isolation for between WLAN to WLAN and WLAN to wired lan. 7. Add error checking in java script to check if user input value is correct. 8. Add Router allow set empty string in single IP text box, if user set single IP mode in remote management page 9. Add Time server allow user to input minus value. 10. Fix can not delete virtual server entry. 11. Fix can not access UI web for a while when PPTP idle timeout 12. Fix when change LAN IP, there will be an extra DHCP client list in status page. V1.00.012 1. Add WPA function 2. Add 802.1x function