Devices 1. Modem: To let SentryPlus notify you via pager you must setup the modem device. a. COM Port: The communication port. (refer to the device tty name) b. Baud Rate: Define the data transmitting speed. c. Initialize String: The string, which is sent to the modem before paging is attempted. d. Dial Prefix: The string, which added to the beginning of each of the Pager Number before they are sent to the modem. 2. Notification Users -- Pager List: Program will dial modem to notify all the pager number which listed in the pager list. You can input your pager number by yourself. For example: 060123456 is your pager number, each ',' tells modem to delay 2 seconds, delay time is for waiting the response signal from switching then transmit the display number 119. 119 will appear in your pager LCD. To trigger the pager notification you must enable the Pager Action in the Action dialog box. a. Add: Add a new pager number. b. Modify: Modify the selected pager number. c. Delete: Delete the selected pager number. 3. Notification Users -- e-mail: You can also e-mail information to users when power event occurred. To trigger the e-mail notification you must enable the e-mail Action in the Action dialog box. a. Add: Add a new user. b. Modify: Modify the selected user name. c. Delete: Delete the selected user. 4. Notification Users -- Network Broadcast: You can also broadcasting information to users when power event occurred. The broadcast function associate with Microsoft Messager to send message so you must run under the Windows NT operating system. To trigger the broadcasting notification you must enable the Broadcast Action in the Action dialog box. a. Domain: Enable this item to broadcast all the users in the domain, otherwise SentryPlus will send messages to the hosts that user assigned. b. Add: Add a new machine name. c. Modify: Modify the selected machine name. d. Delete: Delete the selected name. 5. Close: Close the Configuration window.