UPS 

1. UPS Property: This dialog box allows you to configure the UPS 
		COM port, battery replacement date,... etc. Load Warning 
		and Load Severity used to prevent UPS overload(see the 
		UPS hardware user's manual). In general, Load Warning 
		will notify user to reduce the UPS loading, Load Severity 
		will shutdown the computer to prevent overload. 
 
a. COM Port: The port which connects to UPS. (refer to the 
		device tty name) 
b. Load Warning: Load warning. 
c. Load Severity: User must reduce UPS loading. 
d. Last Battery Replacement Date: Record last battery replacement date. 
e. Next Battery Replacement Date: The date of next battery 
		replacement, SentryPlus will notify user to replace 
		the battery. 
f. Host Name: Local host name. 


2. Attached Devices: Assign the attached device name. When you're 
		controlling the outlet, SentryPlus will let you know 
		which devices you are controlling. 
 
a. Select an Outlet Group: Assign an outlet group. Please see the 
		back panel carefully, Some outlets may share one control 
		relay, these outlets called outlet group. If you turn off 
		outlet group1(for example: outlet1 and outlet2) then UPS 
		will stop power output to outlet1 and outlet2. 
b. Device Name: Assign the attached device names, for example: 
		Outlet Group1 is for printer, Outlet Group2 is for computer. 
		These records can improve the efficiency of your management. 
		Don't forget to press the Update button. 
c. UpdateíGUpdate your change. 


3. Log Management: (Please consider about the free space in your 
		hard disk) 
 
a. Maximun Event Log Entries: Always SentryPlus to preserve 
		less than the assigned entries of event log. 
b. Data Log Interval: Time to save a record of UPS data. 
c. Maximun Data Log Storage: It allows you to save how many months 
		UPS data files. 
		
		
4. Schedule: This function allows you to shutdown, restart, test 
		and turn on/off outlet. You can schedule up to 6 events. 
		Setting is based on day, week or month and up to a period 
		of 2 years. 
 
Choose the applicable schedule to set whether it be for: 
a. One Time: This set schedule is applicable for a single day. 
b. Daily: This set schedule is applicable for every day 
c. Weekly: This set schedule is applicable for once a week period. 
d. Monthly: This set schedule is applicable for once a month period. 


5. Action: The action menu provides you with a list of events to 
		choose from. The event and/or any combination of these 
		actions can be selected from the Choose Event list box. 
		Actions that are already enabled will show a check mark. 
		To delay the actions, set the desired time for delay in 
		the Delay combo box. 
 
a. Enable Auto-Save: SentryPlus will save opened files and 
		close applications automatically when you enable this function. 
b. Choose Event: When you select one item in the list the action 
		buttons will display current setting. Press button to do 
		further configuration. 
c. Set Default: Set all the actions to default values. 
d. Delay: The power event must stay the delay time to trigger actions. 


6. Stop All Action: Clicking on this, terminates all the actions 
		immediately. 


7. Voltage Sensitivity: Adjust the UPS voltage sensitivity. 
 

8. Transfer Voltage: Change the low transfer voltage and high 
		transfer voltage. This function let your UPS suit the 
		local power environment. 
 
a. Low Transfer Voltage: When utility power voltage lower than 
		the assigned value UPS will switch to backup. the output 
		power is supplied from battery. 
b. High Transfer Voltage: When utility power voltage higher than 
		the assigned value UPS will switch to backup. The output 
		power supplied from battery.