Action

1. Shutdown: Shutdown/Suspend the operating system or shutdown UPS. 
		If you select shutdwon item SentryPlus will execute 
		or ignore the Auto-Save function depend on your selection(in 
		the Action dialog box). But if you select the suspend item, 
		program will ignore the Auto-Save function.
		The action of shutdown or suspend same as you select the 
		Shutdown... from Windows Start menu. 
 
2. Logging: Permits you to log event as well as modify default 
		logging message. You can see this message in the Event Log 
		dialog box. 
 

3. Broadcasting: Permits you to broadcast an event based on a set 
		period of time. If you want to be notified once, set the 
		time period to "0". However, if you want to be notified 
		more than once, set the time period to a bigger number. 
		Each number corresponds to the times of notification. 
 

4. Paging: Permits you to set the time period of paging intervals. 
		If you want to be notified once, set the time period 
		to "0". However, if you want to be notified more than 
		once, set the time period to a bigger number. Each number 
		corresponds to the times of notification. 
 

5. Command: Permits you to execute command files and set a period 
		of time to delay its activation. To test this function, 
		you can click the Test button. To enable or disable this 
		action, mark the Enable Command check box. 
 

6. Alarm: Permits you to send out audible alarm instead of a 
		broadcast message. If you want to be notified once, set 
		the	time period to "0". However, if you want to be 
		notified more than once, set the time period to a bigger 
		number. Each number corresponds to the times of 
		notification. 
 

7. e-mail: If you want to be notified once, set the time period 
		to "0". However if you want to be notified more than 
		once, set the time period to a bigger number. Each number 
		corresponds to the times of notification. You can edit 
		the user list by clicking the Edit list button, and add, 
		modify or delete any user name in the list. To enable 
		or disable this action, mark the Enable e-mail check box. 
 

8. SNMP Trap: Lets you send a SNMP trap when the relative power 
		event occurs. To enable or disable this action, mark the 
		Enable SNMP Trap check box. You also need to specify the 
		SNMP Trap target hosts and community string, please see 
		the SNMP dialog box in the Network menu. 
 

9. Receptacle Control: Permits you to control Receptacle Relay 
		on or off. Each Receptacle Relay may control not only 
		one outlet, please see the rear panel of your UPS or the 
		UPS hardware user's manual.