X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: by onstor-exch02.onstor.net 
	id <01C78DCB.E0DC4DEA@onstor-exch02.onstor.net>; Thu, 3 May 2007 14:41:59 -0700
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-class: urn:content-classes:message
Subject: RE: bobcat rev. number for intel pcmcia chip
Date: Thu, 3 May 2007 14:41:58 -0700
Message-ID: <BB375AF679D4A34E9CA8DFA650E2B04E038C9E73@onstor-exch02.onstor.net>
In-Reply-To: <20070503143926.37282e31@ripper.onstor.net>
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
Thread-Topic: bobcat rev. number for intel pcmcia chip
Thread-Index: AceNy4YGBR9Q0KcOTFWLUul4POUjtAAABMsA
References: <BB375AF679D4A34E9CA8DFA650E2B04E0103C429@onstor-exch02.onstor.net><BB375AF679D4A34E9CA8DFA650E2B04E0133B0B1@onstor-exch02.onstor.net><BB375AF679D4A34E9CA8DFA650E2B04E0133B0C9@onstor-exch02.onstor.net><BB375AF679D4A34E9CA8DFA650E2B04E038C9D09@onstor-exch02.onstor.net><20070503131753.52eb6dc4@ripper.onstor.net><BB375AF679D4A34E9CA8DFA650E2B04E038C9E5B@onstor-exch02.onstor.net> <20070503143926.37282e31@ripper.onstor.net>
From: "Brian Stark" <brian.stark@onstor.com>
To: "Andy Sharp" <andy.sharp@onstor.com>

Not yet.  If you need it right now, I can ask Warren to do it since I'm
here today...



> -----Original Message-----
> From: Andy Sharp=20
> Sent: Thursday, May 03, 2007 2:39 PM
> To: Brian Stark
> Subject: Re: bobcat rev. number for intel pcmcia chip
>=20
> Thanks.  Does it have a cable hooked up to ssc debug serial=20
> port (16550)?  Just in case ~:^)
>=20
> Thanks,
>=20
> a
>=20
> On Thu, 3 May 2007 14:33:53 -0700 "Brian Stark"
> <brian.stark@onstor.com> wrote:
>=20
> > Andy,
> >=20
> > You can use my RoHS Bobcat that's in Pleasanton:
> >=20
> > SSC console:	10.1.1.100 2013
> > SSC IP:		10.1.1.111
> > Power sentry: 	10.1.1.102 2001, port .a3 (login, passwd =3D admn)
> >=20
> > Feel free to upgrade any software or PROMs.
> >=20
> >=20
> > Brian
> > =20
> >=20
> > > -----Original Message-----
> > > From: Andy Sharp
> > > Sent: Thursday, May 03, 2007 1:18 PM
> > > To: Brian Stark
> > > Cc: Abdallah Harb; Mark Farabaugh; Joe Vitorino
> > > Subject: Re: bobcat rev. number for intel pcmcia chip
> > >=20
> > > JR hasn't been able to find anything.
> > >=20
> > > On Thu, 3 May 2007 11:43:43 -0700 "Brian Stark"
> > > <brian.stark@onstor.com> wrote:
> > >=20
> > > > Abdallah,
> > > > =20
> > > > The wire is on the top of the board and attaches=20
> directly to the=20
> > > > TI controller.  Can you take a look to see if it's been added?
> > > > =20
> > > > Andy,
> > > > =20
> > > > I believe that John Rogers was also trying to track down a
> > > system that
> > > > was already installed in the QE lab.  Have you heard=20
> anything back=20
> > > > from him?
> > > > =20
> > > > =20
> > > > Brian
> > > > =20
> > > >=20
> > > >=20
> > > > ________________________________
> > > >=20
> > > > 	From: Abdallah Harb=20
> > > > 	Sent: Thursday, May 03, 2007 11:39 AM
> > > > 	To: Andy Sharp; Brian Stark
> > > > 	Cc: Mark Farabaugh; Joe Vitorino
> > > > 	Subject: FW: bobcat rev. number for intel pcmcia chip
> > > > =09
> > > > =09
> > > > 	Andy,
> > > > 	=20
> > > > 	See email below and attachment regarding the=20
> unit that we were=20
> > > > planning to give you.
> > > > 	Brian, I believe this unit needs the work around that
> > > you did to the
> > > > other 4 units from the same build.
> > > > 	Please advise!
> > > > 	=20
> > > > 	Thanks,
> > > > 	Abdallah
> > > > =09
> > > > ________________________________
> > > >=20
> > > > 	From: Abdallah Harb
> > > > 	Sent: Thu 4/26/2007 6:12 PM
> > > > 	To: Brian Stark; Joe Vitorino; Mark Farabaugh
> > > > 	Subject: RE: bobcat rev. number for intel pcmcia chip
> > > > =09
> > > > =09
> > > > 	RoHS 1 is failing to load the run time image.
> > > > 	I tried loading from both compact flash locations wd0a
> > > & wd1a, but
> > > > both failed.
> > > > 	Attached is the capture while loading from both=20
> CF locations.
> > > > 	Thanks,
> > > > 	Abdallah
> > > >=20
> > > >=20
> > > > 	=20
> > > >=20
> > > > ________________________________
> > > >=20
> > > > 	From: Brian Stark
> > > > 	Sent: Tue 4/24/2007 4:56 PM
> > > > 	To: Joe Vitorino; Mark Farabaugh; Abdallah Harb
> > > > 	Subject: Fw: bobcat rev. number for intel pcmcia chip
> > > > =09
> > > > =09
> > > >=20
> > > > 	FYI...see below...
> > > > =09
> > > > 	Andy needs a RoHS Bobcat.
> > > > =09
> > > > =09
> > > > 	Brian
> > > > =09
> > > > =09
> > > > =09
> > > > =09
> > > > 	-----Original Message-----
> > > > 	From: Abdallah Harb
> > > > 	To: Brian Stark
> > > > 	Sent: Tue Apr 24 16:21:37 2007
> > > > 	Subject: RE: bobcat rev. number for intel pcmcia chip
> > > > =09
> > > > 	oops.. It's actually not.
> > > > =09
> > > > 	Check with Joe V. if you can borrow RoHS1.
> > > > 	It was at ACT, and now we have it in the HW lab.
> > > > =09
> > > > 	Thanks,
> > > > 	Abdallah
> > > > =09
> > > > =09
> > > > 	________________________________
> > > > =09
> > > > 	From: Brian Stark
> > > > 	Sent: Tue 4/24/2007 4:02 PM
> > > > 	To: Abdallah Harb
> > > > 	Subject: Re: bobcat rev. number for intel pcmcia chip
> > > > =09
> > > > =09
> > > > =09
> > > > 	Abdallah,
> > > > =09
> > > > 	Are you sure this is a RoHS Bobcat?
> > > > =09
> > > > =09
> > > > 	Brian
> > > > =09
> > > > =09
> > > > 	-----Original Message-----
> > > > 	From: Abdallah Harb
> > > > 	To: Andy Sharp; Joe Vitorino; Mark Farabaugh
> > > > 	CC: Brian Stark
> > > > 	Sent: Tue Apr 24 15:38:39 2007
> > > > 	Subject: RE: bobcat rev. number for intel pcmcia chip
> > > > =09
> > > > 	Joe, Mark,
> > > > =09
> > > > 	Please let me know if Andy can borrow our B.Prod108?
> > > > 	The unit belongs to OPs, and it was used by Datest.
> > > > =09
> > > > 	Thanks,
> > > > 	Abdallah
> > > > =09
> > > > 	________________________________
> > > > =09
> > > > 	From: Andy Sharp
> > > > 	Sent: Tue 4/24/2007 3:13 PM
> > > > 	To: Abdallah Harb
> > > > 	Cc: Brian Stark
> > > > 	Subject: Re: bobcat rev. number for intel pcmcia chip
> > > > =09
> > > > =09
> > > > =09
> > > > 	4 weeks, +/-
> > > > =09
> > > > 	On Tue, 24 Apr 2007 15:06:01 -0700 "Abdallah Harb"
> > > > 	<abdallah.harb@onstor.com> wrote:
> > > > =09
> > > > 	> Yes, we have a 2260 Rev B2 that OPs is using in the HW
> > > > 	> lab. For how long the unit is needed?
> > > > 	>
> > > > 	> Thanks,
> > > > 	> Abdallah
> > > > 	>
> > > > 	>
> > > > 	> ________________________________
> > > > 	>
> > > > 	> From: Brian Stark
> > > > 	> Sent: Tue 4/24/2007 1:49 PM
> > > > 	> To: Andy Sharp; Abdallah Harb
> > > > 	> Subject: RE: bobcat rev. number for intel pcmcia chip
> > > > 	>
> > > > 	>
> > > > 	>
> > > > 	> Andy,
> > > > 	>
> > > > 	> I think you mean the TI part instead of the=20
> Intel/Cirrus
> > > > 	> part.
> > > > The
> > > > 	> TI part is populated on the Bobcat RoHS motherboard,
> > > > 	> and the=20
> > > > current
> > > > 	> revision of that board is B1.  The Rev 1 and A1=20
> > > boards are hardware
> > > > 	> equivalent and can also be used.
> > > > 	>
> > > > 	>
> > > > 	> Abdallah,
> > > > 	>
> > > > 	> Do we have any spares in Ops?  If not, then=20
> I'll see if
> > > > 	> one of
> > > > the
> > > > 	> Rev 1 boards in Pleasanton can be used.
> > > > 	>
> > > > 	>
> > > > 	> Brian
> > > > 	>
> > > > 	>
> > > > 	> > -----Original Message-----
> > > > 	> > From: Andy Sharp
> > > > 	> > Sent: Tuesday, April 24, 2007 1:39 PM
> > > > 	> > To: Brian Stark; Abdallah Harb
> > > > 	> > Subject: bobcat rev. number for intel pcmcia chip
> > > > 	> >
> > > > 	> > Hi Brian,
> > > > 	> >
> > > > 	> > I need to request a bobcat which has the Intel part
> > > > 	> > rather than the Cirrus part for the pcmcia
> > > > 	> > controller. =20
> > > Can you tell
> > > > 	> > me what minimum revision level I need to ask for?
> > > > 	> >
> > > > 	> > Thanks,
> > > > 	> >
> > > > 	> > a
> > > > 	> >
> > > > 	>
> > > > =09
> > > > =09
> > > > =09
> > > > =09
> > > > =09
> > > >=20
> > >=20
>=20
