X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: by onstor-exch02.onstor.net 
	id <01C76665.ED0A0686@onstor-exch02.onstor.net>; Wed, 14 Mar 2007 11:23:55 -0700
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-class: urn:content-classes:message
Subject: RE: please boot linux on your machine
Date: Wed, 14 Mar 2007 11:23:54 -0700
Message-ID: <BB375AF679D4A34E9CA8DFA650E2B04E02D8F447@onstor-exch02.onstor.net>
In-Reply-To: <20070314110045.42525a85@ripper.onstor.net>
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
Thread-Topic: please boot linux on your machine
Thread-Index: AcdmYrAx0UUQ+oxYSOaZSjSd9aRxlgAAtObw
From: "Warren Gale" <warren.gale@onstor.com>
To: "Andy Sharp" <andy.sharp@onstor.com>

Ok, What I did was to upgrade my SSC prom to the last one I gave you,
and did the load n go...  Here is what I got.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
SSC-PROM>
SSC-PROM> load -a 83000000 10.1.1.189 vmlinux.bin
load, ip addr =3D 0xa0101bd, fname =3D vmlinux.bin
loading vmlinux.bin from 0xa0101bd at 0x83000000
tpl_findBindCb prot=3D17 lport=3D9736
tpl_allocBindCb
tftp_tplAddConnInd
TFTP transfer completed.
tftp_tplDelConnInd
binary load, 2355336 bytes (0x23f088)
SSC-PROM>
SSC-PROM>
SSC-PROM> g 83000000
env[0] =3D 80386a88:.cpuclock=3D799983972.
env[1] =3D 80386ad8:.memsize=3D512.
env[2] =3D 80386b28:.osloadoptions=3DmAt.
env[3] =3D 80386b78:.boot=3Dcold.
env[4] =3D 80386bc8:.busclock=3D133.
env[5] =3D 80386c18:.ipaddr=3D10.1.1.109.
env[6] =3D 80386c68:.netmask=3D255.255.0.0.
env[7] =3D 80386cb8:.macaddr0=3D.00:07:34:01:aa:00.
env[8] =3D 80386d08:.macaddr1=3D.00:07:34:01:aa:01.
env[9] =3D 80386d58:.bootdev=3D/dev/wd1a.
prom_init: arcs_cmdline =3D console=3DttyS0,57600n8 root=3D/dev/nfs
nfsroot=3D10.0.0.42:/var/nfsroot/bobcat,v3 ip=3D10.2.9.7:1
0.0.0.42:10.2.0.1:255.255.255.0:coolcat
prom_init: argc =3D 0x1, argv =3D 0x802d39a8
prom_init: env[0] =3D 'cpuclock=3D799983972'
prom_init: env[1] =3D 'memsize=3D512'
prom_init: env[2] =3D 'osloadoptions=3DmAt'
prom_init: env[3] =3D 'boot=3Dcold'
prom_init: env[4] =3D 'busclock=3D133'
prom_init: env[5] =3D 'ipaddr=3D10.1.1.109'
prom_init: env[6] =3D 'netmask=3D255.255.0.0'
prom_init: env[7] =3D 'macaddr0=3D'
prom_init: env[8] =3D 'macaddr1=3D'
prom_init: env[9] =3D 'bootdev=3D/dev/wd1a'
chassis_seep =3D 0xbc040000
prom_init: eee_ssc_mac[0] =3D 00:07:34:01:00:00
prom_init: eee_ssc_mac[1] =3D 00:07:34:01:00:01
Booting Linux kernel...
uart_base=3D0xbf200000
tmpword =3D 0x3c002
OnStor Bobcat: Board Assembly Rev. A
Booting from prom, BM-FPGA ver. 0.3
Bus clock speed: 133MHz
writing crashdump

flash program 0x23a8 bytes to 0xbfc7c000 from 0x803e7090
sectors ... 7 done


Exception Cause =3D Watchdog Timeout/NMI
ERREPC:   0x83001378
RA:       0x830013fc
SR:       0x34500400
Autoreboot set "off", stopping in debug mode
DEBUG-PROM-SSC:3 >

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Is this what you expected????

Thanks
Warren


-----Original Message-----
From: Andy Sharp=20
Sent: Wednesday, March 14, 2007 11:01 AM
To: Warren Gale
Subject: Re: please boot linux on your machine

On Wed, 14 Mar 2007 10:56:43 -0700 "Warren Gale"
<warren.gale@onstor.com> wrote:

> Ok can't do the "~andys"  that sends me to /homes/anndys..

What's wrong with /homes/andys?

> So Is this the bin file location ???
>  "/n/users/andys/private/.git/linux-mips-2.6"

Same place, different name.  Or, 'yes'.
=20
> Thanks
> Warren
>=20
> -----Original Message-----
> From: Andy Sharp=20
> Sent: Tuesday, March 13, 2007 5:48 PM
> To: Warren Gale
> Cc: Brian Stark
> Subject: please boot linux on your machine
>=20
> Hi Warren,
>=20
>=20
> I think my serial connections may be hosed, can you please try and
> boot linux on your box and see if you get output on the ssc debug
> port?  You can find the file here:
>=20
> ~andys/.git/linux-mips/vmlinux.bin
>=20
> put it on your tftp boot server, and do a 'load -a 83000000
> vmlinux.bin' followed by a 'g'
>=20
> You should some spewage on the regular console, as well as some
> spewage on the debug console/port.
>=20
> Tanks for the sanity check,
>=20
> a
>=20
