X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: by onstor-exch02.onstor.net 
	id <01C7CE1F.341C8D2E@onstor-exch02.onstor.net>; Tue, 24 Jul 2007 10:19:41 -0800
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-class: urn:content-classes:message
Subject: RE: Problem with the new bobcat-config
Date: Tue, 24 Jul 2007 10:19:41 -0800
Message-ID: <BB375AF679D4A34E9CA8DFA650E2B04E049DF12A@onstor-exch02.onstor.net>
In-Reply-To: <20070724110144.60ef2cd0@ripper.onstor.net>
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
Thread-Topic: Problem with the new bobcat-config
Thread-Index: AcfOHLJx+Mw5kauVTn2su7J8XcHH9QAAnnBQ
References: <BB375AF679D4A34E9CA8DFA650E2B04E049DF0FD@onstor-exch02.onstor.net> <20070724110144.60ef2cd0@ripper.onstor.net>
From: "Maxim Kozlovsky" <maxim.kozlovsky@onstor.com>
To: "Andy Sharp" <andy.sharp@onstor.com>

Same problem.

>-----Original Message-----
>From: Andy Sharp
>Sent: Tuesday, July 24, 2007 11:02 AM
>To: Maxim Kozlovsky
>Subject: Re: Problem with the new bobcat-config
>
>do a make clean and then rebuild the kernel.  make sure your .config
>and bobcat-config are in sync.
>
>On Tue, 24 Jul 2007 10:58:28 -0700 "Maxim
>Kozlovsky" <maxim.kozlovsky@onstor.com> wrote:
>
>> It reports some pagefault and hangs. Did you by any change forget to
>> check in some files?
>>
>> Booting Linux kernel...
>> prom_init: env[0] =3D 'cpuclock=3D799988250'
>> prom_init: env[1] =3D 'memsize=3D512'
>> prom_init: env[2] =3D 'osloadoptions=3DmAt'
>> prom_init: env[3] =3D 'boot=3Dcold'
>> prom_init: env[4] =3D 'busclock=3D133'
>> prom_init: env[5] =3D 'ipaddr=3D10.2.204.1'
>> prom_init: env[6] =3D 'netmask=3D255.255.0.0'
>> prom_init: env[7] =3D 'macaddr0=3D00:07:34:02:33:00'
>> prom_init: env[8] =3D 'macaddr1=3D00:07:34:02:33:01'
>> Linux version 2.6.21-rc4-bc9k (maximk@compile2.onstor.net) (gcc
>> version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #178 Tue Jul
>> 24 10:44:31 PDT 2007
>> CPU revision is: 00003440
>> FPU revision is: 00003420
>> OnStor Bobcat: Board Assembly Rev. A4
>> Booting from recovery prom
>> Bus clock speed: 133MHz
>> Determined physical RAM map:
>>  memory: 03000000 @ 00000000 (ROM data)
>>  memory: 0d000000 @ 03000000 (usable)
>>  memory: 10000000 @ 20000000 (reserved)
>>  memory: 40000000 @ 40000000 (reserved)
>> Wasting 393216 bytes for tracking 12288 unused pages
>> Built 1 zonelists.  Total pages: 52736
>> Kernel command line: console=3DttyS0,57600n8 console=3DttyMM0,57600n8
>> root=3D/dev/nfs nfsroot=3D10.0.0.23:/var/nfsroot/max,v3,tcp
>> ip=3D10.2.10.2:10.0.0.23:10.2.0.1:255.255.0.0:eng131:eth0:none
>> Primary instruction cache 16kB, physically tagged, 4-way, linesize 32
>> bytes.
>> Primary data cache 16kB, 4-way, linesize 32 bytes.
>> Secondary cache size 256K, linesize 32 bytes.
>> Synthesized TLB refill handler (27 instructions).
>> Synthesized TLB load handler fastpath (39 instructions).
>> Synthesized TLB store handler fastpath (39 instructions).
>> Synthesized TLB modify handler fastpath (38 instructions).
>> PID hash table entries: 1024 (order: 10, 4096 bytes)
>> Using 399.994 MHz high precision timer.
>> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>> Memory: 208000k/212992k available (2027k kernel code, 4988k reserved,
>> 472k data, 108k init, 0k highmem)
>> Real Time Clock base address =3D bf000000
>> Mount-cache hash table entries: 512
>> NET: Registered protocol family 16
>> Time: MIPS clocksource has been installed.
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>> TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>> TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
>> TCP: Hash tables configured (established 8192 bind 8192)
>> TCP reno registered
>> DS1511 Real Time Clock Driver v1.1
>> io scheduler noop registered
>> io scheduler deadline registered (default)
>> Serial: MPSC driver $Revision: 1.00 $
>> mpsc_drv_probe: Adding MPSC 0
>> ttyMM0 at MMIO 0xbc008000 (irq =3D 52) is a MPSC
>> natsemi dp8381x driver, version 2.1, Sept 11, 2006
>>   originally by Donald Becker <becker@scyld.com>
>>   http://www.scyld.com/network/natsemi.html
>>   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>> natsemi eth0: NatSemi DP8381[56] at 0x19000000 (0000:01:00.0),
>> 00:07:34:02:33:00, IRQ 8, port TP.
>> eth1: reset did not complete in 2000 usec.
>> natsemi eth1: NatSemi DP8381[56] at 0x19001000 (0000:01:01.0),
>> 00:07:34:02:33:01, IRQ 9, port TP.
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=3Dxx
>> pd6729: Cirrus PD6729 PCI to PCMCIA Bridge at 0x18000000 on irq 0
>> pd6729: PCI_COMMAND_MEMORY enabled by firmware.
>> pd6729: Enabling PCI_COMMAND_MASTER.
>> pd6729_pci_probe: io resource start =3D 0x18000000 end =3D 0x18000003
>> pd6729_pci_probe: mem resource start =3D 0x0 end =3D 0x0
>> pd6729: ISA irqs =3D 10,11  polling status changes.
>> pd6729_pci_probe: io resource start =3D 0x18000000 end =3D 0x18000003
>> pd6729_pci_probe: socket[0].io_base =3D b8000000
>> pd6729_pci_probe: socket[0].io_base =3D 00000000
>> pd6729_pci_probe: io resource start =3D 0x18000000 end =3D 0x18000003
>> pd6729_pci_probe: socket[1].io_base =3D b8000000
>> pd6729_pci_probe: socket[1].io_base =3D 00000000
>> pd6729_pci_probe: socket 0 interrupt reg =3D 0x0
>> pd6729_pci_probe: socket 1 interrupt reg =3D 0x0
>> pd6729_pci_probe: dev cap reg =3D 0x21
>> pd6729_pci_probe: timer 835392c8 set for 1000 jiffies
>> pcmcia: parent PCI bridge I/O window: 0x18000000 - 0x187fffff
>> adjust_io: start=3D0x18000000, end=3D0x187fffff
>> adjust_io: probe_io =3D 1
>> cs: IO port probe 0x18000000-0x187fffff: clean.
>> pcmcia: parent PCI bridge Memory window: 0x18800000 - 0x19ffffff
>> pd6729_set_io_map: socket 0 io->start=3D0x0, io->stop=3D0x1,
>> io->flags=3D0x0, map=3D0
>> pd6729_set_io_map: socket 0 get ioctl =3D 0x0
>> pd6729_set_io_map: socket 0 set ioctl =3D 0x0
>> pd6729_set_io_map: socket 0 io->start=3D0x0, io->stop=3D0x1,
>> io->flags=3D0x0, map=3D1
>> pd6729_set_io_map: socket 0 get ioctl =3D 0x0
>> pd6729_set_io_map: socket 0 set ioctl =3D 0x0
>> pd6729[0]: chip revision 2 Cap 2
>> pcmcia: parent PCI bridge I/O window: 0x18000000 - 0x187fffff
>> adjust_io: start=3D0x18000000, end=3D0x187fffff
>> adjust_io: probe_io =3D 1
>> cs: IO port probe 0x18000000-0x187fffff: clean.
>> pcmcia: parent PCI bridge Memory window: 0x18800000 - 0x19ffffff
>> pd6729_set_io_map: socket 1 io->start=3D0x0, io->stop=3D0x1,
>> io->flags=3D0x0, map=3D0
>> pd6729_set_io_map: socket 1 get ioctl =3D 0x0
>> pd6729_set_io_map: socket 1 set ioctl =3D 0x0
>> pd6729_set_io_map: socket 1 io->start=3D0x0, io->stop=3D0x1,
>> io->flags=3D0x0, map=3D1
>> pd6729_set_io_map: socket 1 get ioctl =3D 0x0
>> pd6729_set_io_map: socket 1 set ioctl =3D 0x0
>> pd6729[1]: chip revision 2 Cap 2
>> pd6729_get_status: socket 0 IO card STATUS 0x9e, INTCTL 0x60
>> pd6729_get_status: socket 0 extended defs: 0x0
>> pd6729_get_status: socket 0 data=3D0x0, value=3D0x4c0
>> pd6729_get_status: socket 0 IO card STATUS 0x9e, INTCTL 0x60
>> pd6729_get_status: socket 0 extended defs: 0x0
>> pd6729_get_status: socket 0 data=3D0x0, value=3D0x4c0
>> pd6729_get_status: socket 0 IO card STATUS 0x9e, INTCTL 0x60
>> pd6729_get_status: socket 0 extended defs: 0x0
>> pd6729_get_status: socket 0 data=3D0x0, value=3D0x4c0
>> i2c /dev entries driver
>> TCP cubic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> NET: Registered protocol family 30
>> drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>> pd6729_get_status: socket 1 IO card STATUS 0x9e, INTCTL 0x60
>> pd6729_get_status: socket 1 extended defs: 0x37
>> pd6729_get_status: socket 1 data=3D0x37, value=3D0x4c0
>> pd6729_get_status: socket 1 IO card STATUS 0x9e, INTCTL 0x60
>> pd6729_get_status: socket 1 extended defs: 0x37
>> pd6729_get_status: socket 1 data=3D0x37, value=3D0x4c0
>> pd6729_get_status: socket 1 IO card STATUS 0x9e, INTCTL 0x60
>> pd6729_get_status: socket 1 extended defs: 0x37
>> pd6729_get_status: socket 1 data=3D0x37, value=3D0x4c0
>> pd6729_get_status: socket 0 IO card STATUS 0xff, INTCTL 0x60
>> pd6729_get_status: socket 0 extended defs: 0x0
>> pd6729_get_status: socket 0 data=3D0x0, value=3D0x1c0
>> pd6729_get_status: socket 0 IO card STATUS 0xef, INTCTL 0x60
>> pd6729_get_status: socket 0 extended defs: 0x0
>> pd6729_get_status: socket 0 data=3D0x0, value=3D0x1c0
>> pccard: PCMCIA card inserted into slot 0
>> cs: memory probe 0x18800000-0x19ffffff: excluding
>> 0x18f80000-0x19ffffff nonstatic_find_mem_region: alloc_res returned 0
>> pcmcia: registering new device pcmcia0.0
>> nonstatic_find_io_region: s_data->io_db=3D{io_db=3D{base=3D0x0, =
num=3D0x0,
>> next=3D8369ec80}}
>> nonstatic_find_io_region: =
s_data->io_db=3D{io_db=3D{base=3D0x18000000,
>> num=3D0x800000, next=3D8369ed0c}}
>> nonstatic_find_io_region: calling pci_bus_alloc_resource to find
>> 00000000
>> nonstatic_find_io_region: res->start=3D0x18000010, =
res->end=3D0x1800001f
>> pd6729_set_io_map: socket 0 io->start=3D0x18000010,
io->stop=3D0x1800001f,
>> io->flags=3D0x5, map=3D0
>> pd6729_set_io_map: socket 0 get ioctl =3D 0x0
>> pd6729_set_io_map: socket 0 set ioctl =3D 0x2
>> CPU 0 Unable to handle kernel paging request at virtual address
>> d000001e, epc =3D=3D 83154018, ra =3D=3D 83153ffc
>> ide_probe+0x428/0x570 ide_probe+0x40c/0x570
>> Modules linked in:
>> [<83154018>] ide_probe+0x428/0x570
>> [<8315a924>] pcmcia_device_probe+0xd0/0x1bc
>> [<83139548>] really_probe+0x80/0x1a8
>> [<83138478>] bus_for_each_drv+0x64/0xcc
>> [<8313986c>] device_attach+0xac/0xd4
>> [<83138354>] bus_attach_device+0x30/0x8c
>> [<83136ae4>] device_add+0x610/0x794
>> [<8315b3e8>] pcmcia_device_add+0x1f8/0x3a0
>> [<8315b6bc>] pcmcia_card_add+0xc0/0x184
>> [<8315b868>] ds_event+0xe8/0x118
>> [<83154724>] send_event+0xcc/0x110
>> [<83154e14>] socket_insert+0xe0/0x1c0
>> [<83155924>] pccardd+0x314/0x31c
>> [<83039154>] kthread+0xe8/0x130
>> [<83004930>] kernel_thread_helper+0x10/0x18
>> eth0: DSPCFG accepted after 0 usec.
>> eth0: link up.
>> eth0: Setting full-duplex based on negotiated link capability.
>> pd6729_get_status: socket 1 IO card STATUS 0xff, INTCTL 0x60
>> pd6729_get_status: socket 1 extended defs: 0x37
>> pd6729_get_status: socket 1 data=3D0x37, value=3D0x1c0
>> pd6729_get_status: socket 1 IO card STATUS 0xef, INTCTL 0x60
>> pd6729_get_status: socket 1 extended defs: 0x37
>> pd6729_get_status: socket 1 data=3D0x37, value=3D0x1c0
>> pccard: PCMCIA card inserted into slot 1
>> cs: memory probe 0x18800000-0x19ffffff: excluding
>> 0x18800000-0x1897ffff 0x18f80000-0x19ffffff
>> nonstatic_find_mem_region: alloc_res returned 0
>> IP-Config: Complete:
>>       device=3Deth0, addr=3D10.2.10.2, mask=3D255.255.0.0, =
gw=3D10.2.0.1,
>>      host=3Deng131, domain=3D, nis-domain=3D(none),
>>      bootserver=3D10.0.0.23, rootserver=3D10.0.0.23, rootpath=3D
