X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: by onstor-exch02.onstor.net 
	id <01C81D8D.7437DD21@onstor-exch02.onstor.net>; Fri, 2 Nov 2007 12:17:55 -0800
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-class: urn:content-classes:message
Subject: RE: rcon is working
Date: Fri, 2 Nov 2007 12:17:55 -0800
Message-ID: <BB375AF679D4A34E9CA8DFA650E2B04E06540CF0@onstor-exch02.onstor.net>
In-Reply-To: <20071102131457.020010b0@ripper.onstor.net>
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
Thread-Topic: rcon is working
Thread-Index: AcgdjQroKVBMdc+JTWmXIPqdhRgVbAAADSiw
References: <BB375AF679D4A34E9CA8DFA650E2B04E06540AB6@onstor-exch02.onstor.net><20071102105058.23185e09@ripper.onstor.net><BB375AF679D4A34E9CA8DFA650E2B04E06540B69@onstor-exch02.onstor.net><20071102113410.26e3488b@ripper.onstor.net><BB375AF679D4A34E9CA8DFA650E2B04E06540C8D@onstor-exch02.onstor.net> <20071102131457.020010b0@ripper.onstor.net>
From: "Maxim Kozlovsky" <maxim.kozlovsky@onstor.com>
To: "Andy Sharp" <andy.sharp@onstor.com>

There is a line in /etc/syslog.conf which turns out kprintfs. Let me
take it I'll see why it is complaining about the link.

>-----Original Message-----
>From: Andy Sharp
>Sent: Friday, November 02, 2007 1:15 PM
>To: Maxim Kozlovsky
>Subject: Re: rcon is working
>
>Well, I'm not getting any panics, but I'm getting so many messages from
>txrx console that I'm losing the watchdog.  I'm getting this
>continuously:
>
>tx1:
>tx1:
>tx1:
>tx1: 3: luc_link_up:301: lport fp1.0 UP
>tx1:
>tx1: 4: Port : fp1.1 is UP
>tx1:
>tx1: 5: luc_link_up:301: lport fp1.1 UP
>tx1:
>tx1: 6: Port : fp1.2 is DOWN
>tx1:
>tx1: 7: luc_link_down: 359: lport fp1.2 DOWN.
>tx1:
>tx1: 8: luc_link_down:381: Spurious link down notification. Port fp1.2.
>tx1:
>tx1: 9: Port : fp1.3 is DOWN
>tx1:
>tx1: 10: luc_link_down: 359: lport fp1.3 DOWN.
>tx1:
>tx1: 11: luc_link_down:381: Spurious link down notification. Port
fp1.3.
>
>Then eventually the watchdog bites.
>
>
>On Fri, 2 Nov 2007 12:31:52 -0700 "Maxim Kozlovsky"
><maxim.kozlovsky@onstor.com> wrote:
>
>> Sure please try. It would be great if you could check in something.
>>
>> >-----Original Message-----
>> >From: Andy Sharp
>> >Sent: Friday, November 02, 2007 11:34 AM
>> >To: Maxim Kozlovsky
>> >Subject: Re: rcon is working
>> >
>> >I think I found the source of the problem.  If so, I could check in
>> >the new kernel, which would make things easier for you, no?  Do you
>> >mind if I try my changes one last time?
>> >
>> >Cheers,
>> >
>> >a
>> >
>> > On Fri, 2 Nov 2007 10:55:02 -0700 "Maxim Kozlovsky"
>> ><maxim.kozlovsky@onstor.com> wrote:
>> >
>> >> Ok, I'll do that. At least the rcon works now. Could you please
>> remind
>> >> me where is your tree?
>> >>
>> >> >-----Original Message-----
>> >> >From: Andy Sharp
>> >> >Sent: Friday, November 02, 2007 10:51 AM
>> >> >To: Maxim Kozlovsky
>> >> >Subject: Re: rcon is working
>> >> >
>> >> >Well, I'm not sure what to do now as you've been making lots of
>> >> >changes, and I've been making, well, a few (much fewer) changes,
>> >> >and it doesn't seem productive for both of us to be working on
>> >> >the same code making incompatible changes.
>> >> >
>> >> >So, do you want to take what you've done already and make it work
>> >> >on Bobcat as well?  Or do you want me to continue to try and get
>> what
>> >> >I've got working on Bobcat?  Here is a current trace of output
I'm
>> >> >getting.
>> >> >
>> >> >OnStor Bobcat: Board Assembly Rev. A4
>> >> >
>> >> >NET: Registered protocol family 16
>> >> >per_cpu_mappings: mvmemregion.va_start =3D c0000000
>> >> >per_cpu_mappings: marvel_base=3Dbc000000
>> >> >bobcat_pci1_init: io_base =3D 0x18000000, io_size =3D 0x800000
>> >> >bobcat_pci1_init: mem0_base =3D 0x1a000000, mem0_size =3D =
0x2000000
>> >> >bobcat_pci1_init: mem1_base =3D 0x19000000, mem1_size =3D =
0x1000000
>> >> >bobcat_pci1_init: mem2_base =3D 0x18800000, mem2_size =3D =
0x800000
>> >> >bobcat_pci1_init: mem_base =3D 0x18800000, mem_size =3D 0x1800000
>> >> >bobcat_pci1_init: mv_io_base =3D 0x0, mv_io_size =3D 0x0
>> >> >bobcat_pci1_init: mv_io_base =3D 0x18000000, mv_io_size =3D =
0x800000
>> >> >bobcat_pci_init: pci io_v_base =3D 0xb8000000
>> >> >
>> >> >bobcat_pci_init: mips_io_port_base =3D 0xb8000000
>> >> >
>> >> >bobcat_pci_init: pci_probe_only=3D1
>> >> >Time: MIPS clocksource has been installed.
>> >> >
>> >> >i2c /dev entries driver
>> >> >MGMTBUS: registered net device mgmtbus @ c2000000 on irqs 36, 38,
>> >> >5 rcon device will be in the hizzy sizzy @ c20000e0
>> >> >TCP cubic registered
>> >> >NET: Registered protocol family 1
>> >> >NET: Registered protocol family 17
>> >> >NET: Registered protocol family 30
>> >> >
>> >> >
>> >> >INIT: version 2.86 booting
>> >> >Starting the hotplug events dispatcher: udevd.
>> >> >Synthesizing the initial hotplug events...done.
>> >> >udevd-event[697]: rename_netif: error changing netif name eth0 to
>> >> >eth2: Device or resource busy
>> >> >Waiting for /dev to be fully populated...fp0: [dp_proxy_init]:
>> >> >pass
>> 1
>> >> >tx0: [dp_proxy_init]: pass 1
>> >> >fp0: pte_setup, region =3D 2, phys_offset =3D 0x20000000, virt =
=3D
>> >> 0x2000000000,
>> >> >psize =3D 20000000, vsize =3D 20000000, pgsize =3D 8000000,
>> >> >readwrite_size =3D 0x20000000
>> >> >tx0: pte_setup, region =3D 4, phys_offset =3D 0x28000000, virt =
=3D
>> >> 0x4000000000,
>> >> >psize =3D 18000000, vsize =3D 18000000, pgsize =3D 8000000,
>> >> >readwrite_size =3D 0x18000000
>> >> >tx0: pte_setup, region =3D 7, phys_offset =3D 0x28000000, virt =
=3D
>> >> 0x7000000000,
>> >> >psize =3D 18000000, vsize =3D 18000000, pgsize =3D 8000000,
>> >> >readwrite_size =3D 0x18000000
>> >> >tx0: Zeroing the WKA area, 0x73000000
>> >> >fp0: pte_setup, region =3D 6, phys_offset =3D 0x20000000, virt =
=3D
>> >> 0x6000000000,
>> >> >psize =3D 20000000, vsize =3D 20000000, pgsize =3D 8000000,
>> >> >readwrite_size =3D 0x20000000
>> >> >fp0: Zeroing the WKA area, 0x73000000
>> >> >fp0: unusable buffer, 0x4007fff800, phys_base =3D 9ffff800,
>> >> >phys_end =3D c0001a00
>> >> >done.
>> >> >Activating swap...done.
>> >> >fp0: [dp_proxy_init]: pass 2
>> >> >fp0: sb1250dm_initModule: sb1250dmCfg[0]=3D0x1000207e00
>> >> >fp0: sb1250dm_initModule: sb1250dmCfg[1]=3D0x1000207c80
>> >> >fp0: sb1250dm_initModule: sb1250dmCfg[2]=3D0x1000207b00
>> >> >fp0: sb1250dm_initModule: sb1250dmCfg[3]=3D0x1000207980
>> >> >fp0: esm_stackInit(): Enter
>> >> >fp0: esm_stackInit(): Leave
>> >> >fp0: bmc12500_install_allocators: install RUNTIME allocators
>> >> >fp0: bmc12500Eth_initModule w/AUTO TX Retrans enabled
>> >> >fp0: bcm12500Eth_initModule SEQ RRX Retrans enabled
>> >> >fp0: isModel2280: Model 2220/40/60
>> >> >fp0: rmc: rmc_init(): RMC version 2.0.2 - myslot[1] mycpu[2]
>> >> myapp_id[79]
>> >> >fp0: fs_initModule
>> >> >Setting the system clock..
>> >> >CPU 0 Unable to handle kernel paging request at virtual address
>> >> 1a7004a0,
>> >> >epc =3D=3D 8316d90c, ra =3D=3D 8316d8fc
>> >> >Oops[#1]:
>> >> >Cpu 0
>> >> >$ 0   : 00000000 b000ef00 00000000 00000000
>> >> >$ 4   : fffffffe 832a2098 832a20b8 b000ef00
>> >> >$ 8   : ffffffba 00000000 00000000 00000000
>> >> >$12   : 00000020 00000006 00000003 0000006b
>> >> >$16   : 1a7004a0 835172c0 c00dd360 c00dd340
>> >> >$20   : 00000000 1a700480 c2000030 00000001
>> >> >$24   : 00000002 83002174
>> >> >$28   : 8fae0000 8fae1cf8 00000002 8316d8fc
>> >> >Hi    : 00000352
>> >> >Lo    : 000303a4
>> >> >epc   : 8316d90c mgmtbus_intr+0x174/0x22c     Not tainted
>> >> >ra    : 8316d8fc mgmtbus_intr+0x164/0x22c
>> >> >Status: b000ef03    KERNEL EXL IE
>> >> >Cause : 00001008
>> >> >BadVA : 1a7004a0
>> >> >PrId  : 00003440
>> >> >Modules linked in:
>> >> >Process hwclock (pid: 1344, threadinfo=3D8fae0000, =
task=3D835bac00)
>> >> >Stack : b9000000 b9000000 fff9e586 ffffffff 8353d800 00000000
>> >> >00000000 00000001
>> >> >        00000026 00000000 00000000 00000000 00000000 8316ec6c
>> >> > 83290000
>> >> >00000000
>> >> >        8fae1d38 8fae1d38 8304891c 83298e2c 0000000a 832a0000
>> >> > 00000001
>> >> >8329a91c
>> >> >        83261d88 00000026 40247009 8fe73de0 00000001 8304a860
>> >> > b000ef00
>> >> >8fae1e80
>> >> >        40247009 8fe73de0 00400000 8fae1e80 83000ed4 83026dfc
>> >> > 40247009
>> >> >8fe73de0
>> >> >        ...
>> >> >Call Trace:
>> >> >[<8316d90c>] mgmtbus_intr+0x174/0x22c
>> >> >[<8316ec6c>] mgmtbus_pci_intr+0x4c/0x70
>> >> >[<8304891c>] handle_IRQ_event+0x6c/0xcc
>> >> >[<8304a860>] handle_level_irq+0x90/0x130
>> >> >[<83000ed4>] ll_bc_mv64440_irq+0x120/0x1b0
>> >> >[<83002a14>] ret_from_irq+0x0/0x4
>> >> >[<83001494>] ds1511_get_rtctime+0xbc/0x1e4
>> >> >[<83002394>] ds1511_ioctl+0x220/0x42c
>> >> >[<83080e0c>] vfs_ioctl+0x6c/0x34c
>> >> >[<8308113c>] sys_ioctl+0x50/0x94
>> >> >[<8300a5e0>] stack_done+0x20/0x3c
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >On Fri, 2 Nov 2007 09:46:25 -0700 "Maxim Kozlovsky"
>> >> ><maxim.kozlovsky@onstor.com> wrote:
>> >> >
>> >> >> ... which is an indication that management traffic will
probably
>> >> >> work as well soon. If only fp and txrx stopped crashing, we
>> >> >> would find out if it does.
>> >> >>
>> >> >> starting periodic command scheduler: crond
>> >> >> mgmtbus_mailbox_intr
>> >> >> mgmtbus_mailbox_intr
>> >> >> rcon_intr
>> >> >> mgmtbus_mailbox_intr
>> >> >> rcon_intr
>> >> >> fp0: Autoreboot "off", stopping in debug mode
>> >> >> rcon_intr
>> >> >> tx0: Autoreboot "off", stopping in debug mode
>> >> >>
>> >> >> Debian GNU/Linux 4.0 cax duart0
>> >> >>
>> >> >> cax:~# rcon-new /dev/rcon0
>> >> >>
>> >> >> rcon_intr
>> >> >>
>> >> >> DEBUG-TXRX0:2 >
>> >> >> rcon_intr
>> >> >>
>> >> >> DEBUG-TXRX0:2 >
>> >> >> rcon_intr
>> >> >>
>> >> >> DEBUG-TXRX0:2 >
>> >> >> rcon_intr
