X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: by onstor-exch02.onstor.net 
	id <01C8937D.C51B3920@onstor-exch02.onstor.net>; Mon, 31 Mar 2008 15:22:56 -0700
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-class: urn:content-classes:message
Subject: RE: IMPORTANT : FTI/migration in branch testing update
Date: Mon, 31 Mar 2008 15:22:56 -0700
Message-ID: <BB375AF679D4A34E9CA8DFA650E2B04E09321194@onstor-exch02.onstor.net>
In-Reply-To: <20080331151207.3c9af198@ripper.onstor.net>
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
Thread-Topic: IMPORTANT : FTI/migration in branch testing update
Thread-Index: AciTfEJtz1BtfzvxT0667JGqOoQcRAAAVuYQ
From: "Tim Gardner" <tim.gardner@onstor.com>
To: "Andy Sharp" <andy.sharp@onstor.com>
Cc: "John Keiffer" <john.keiffer@onstor.com>

Sounds like there are issues with DHCP but FTI using the console works.
Based on this I am going to ask HCL to do the integration into dev as
I am not aware of any blockers that will be introduced.=20

> -----Original Message-----
> From: Andy Sharp=20
> Sent: Monday, March 31, 2008 2:12 PM
> To: Tim Gardner
> Cc: John Keiffer
> Subject: Re: IMPORTANT : FTI/migration in branch testing update
>=20
> Tim,
>=20
> I'd like to get some details from John on the two fails he noted.  But
> it looks like the other tests we talked about have been run=20
> and look OK.
>=20
> Cheers,
>=20
> a
>=20
> On Mon, 31 Mar 2008 14:45:34 -0700 "Tim Gardner"
> <tim.gardner@onstor.com> wrote:
>=20
> > =20
> >=20
> > =20
> >=20
> > ________________________________
> >=20
> > From: John Keiffer=20
> > Sent: Monday, March 31, 2008 2:24 PM
> > To: Sandrine Boulanger; Manohar Divate; Vikas Saini; Selvakumar Balu
> > Cc: Paul Hammer; Tim Gardner; Larry Scheer; Sripal Surendiran (HCL)
> > Subject: RE: IMPORTANT : FTI/migration in branch testing update
> >=20
> > =20
> >=20
> > Cougar CLI system commands:
> >=20
> > System copy all =3D pass
>=20
> =20
> > System copy all -i =3D fail
> >=20
> > System copy init =3D fail
>=20
> Do you have bug numbers or details for these failures?
>=20
> > System config copy =3D pass
> >=20
> > System config restore =3D pass (but filer did not come up properly =
the
> > first time, and required another reboot)
> >=20
> > System config reset =3D  pass
> >=20
> > =20
> >=20
> > Cougar NCM system commands:
> >=20
> > System copy all =3D fails, confirmation page timed out and=20
> did not go to
> > summary screen
> >=20
> > System copy init (all) =3D fails
> >=20
> > System config copy =3D hard to tell if this works
> >=20
> > System config restore =3D this seems to work as it makes the system
> > reboot
> >=20
> > =20
> >=20
> > Cougar CLI FTI:
> >=20
> > FTI copy config from secondary =3D pass (as long as I had=20
> done a system
> > copy all first)
> >=20
> > FTI menu and reboot =3D pass (although I have seen it fail=20
> before where
> > it requires a second reboot before the eth0 ip address is configured
> > properly and the system can be used...)
> >=20
> > =20
> >=20
> > Cougar NCM FTI:
> >=20
> > Can't connect to NCM
> >=20
> > I tried 2 different lab systems one with 172.18.250.252 and one with
> > 172.18.250.249 as interface ips. It does look like the DHCP is found
> > at boot up though. I'm just not sure if the other errors=20
> seen here are
> > keeping this from working... Here is the output:
> >=20
> > =20
> >=20
> > bp0: unknown hardware address type 65535
> >=20
> > bp0: unknown hardware address type 65535
> >=20
> > Listening on LPF/eth0/00:07:34:07:57:80
> >=20
> > Sending on   LPF/eth0/00:07:34:07:57:80
> >=20
> > Sending on   Socket/fallback
> >=20
> > DHCPREQUEST on eth0 to 255.255.255.255 port 67
> >=20
> > DHCPACK from 10.2.0.4
> >=20
> > chmod: failed to get attributes of `/etc/ntp.conf': No such file or
> > directory
> >=20
> > chown: failed to get attributes of `/etc/ntp.conf': No such file or
> > directory
> >=20
> > sed: can't read /etc/ntp.conf: No such file or directory
> >=20
> > invoke-rc.d: ----------------------------------------------------
> >=20
> > invoke-rc.d: WARNING: invoke-rc.d called during shutdown sequence
> >=20
> > invoke-rc.d: enabling safe mode: initscript policy layer disabled
> >=20
> > invoke-rc.d: ----------------------------------------------------
> >=20
> > Stopping NTP server: ntpd.
> >=20
> > Starting NTP server: ntpd.
> >=20
> > bound to 10.2.10.5 -- renewal in 162231 seconds.
> >=20
> > Internet Systems Consortium DHCP Client V3.0.4
> >=20
> > Copyright 2004-2006 Internet Systems Consortium.
> >=20
> > All rights reserved.
> >=20
> > For info, please visit http://www.isc.org/sw/dhcp/
> >=20
> > =20
> >=20
> > bp0: unknown hardware address type 65535
> >=20
> > bp0: unknown hardware address type 65535
> >=20
> > Listening on LPF/eth1/00:07:34:07:57:81
> >=20
> > Sending on   LPF/eth1/00:07:34:07:57:81
> >=20
> > Sending on   Socket/fallback
> >=20
> > DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
> >=20
> > DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
> >=20
> > DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12
> >=20
> > No DHCPOFFERS received.
> >=20
> > No working leases in persistent database - sleeping.
> >=20
> > =20
> >=20
> > -----Original Message-----
> > From: Sandrine Boulanger=20
> > Sent: Monday, March 31, 2008 12:02 PM
> > To: Manohar Divate; Vikas Saini; John Keiffer; Selvakumar Balu
> > Cc: Paul Hammer; Tim Gardner; Larry Scheer; Sripal Surendiran (HCL)
> > Subject: RE: IMPORTANT : FTI/migration in branch testing update
> >=20
> > =20
> >=20
> > Thanks Manny.=20
> >=20
> > Results from Selva on Bobcat:
> >=20
> > 1.    FTI on bobcat (CLI based): OK
> >=20
> > 2.    FTI on bobcat (NCM based): TED00023055 - [Bobcat-Cougar] NCM:
> > Unable to configure FTI through NCM
> >=20
> > 3.    System commands for bobcat (system upgrade and verify): OK
> >=20
> > =20
> >=20
> > Still waiting for an update from Selva for other system commands on
> > Bobcat.
> >=20
> > John, what's the update from your tests?
> >=20
> > =20
> >=20
> > =20
> >=20
> > =20
> >=20
> > -----Original Message-----
> >=20
> > From: Manohar Divate=20
> >=20
> > Sent: Monday, March 31, 2008 11:55 AM
> >=20
> > To: Vikas Saini; John Keiffer; Selvakumar Balu
> >=20
> > Cc: Sandrine Boulanger; Paul Hammer; Tim Gardner; Larry=20
> Scheer; Sripal
> > Surendiran (HCL)
> >=20
> > Subject: RE: IMPORTANT : FTI/migration in branch testing update
> >=20
> > =20
> >=20
> > Team
> >=20
> > =20
> >=20
> > Summary of testing of Bobcat to Cougar Migration
> >=20
> > =20
> >=20
> > Tests passed without any major incidents in fallowing configurations
> >=20
> > =20
> >=20
> > Basic functionalities (retained snapshots, mirror, dmip,=20
> shares, ip's,
> > NCM functionalities)
> >=20
> > System upgrade to sub#15
> >=20
> > System copy all -i
> >=20
> > =20
> >=20
> > =20
> >=20
> > Configuration Tested in QA Lab
> >=20
> > =20
> >=20
> > i) One node Bobcat filer to a Cougar filer
> >=20
> > ii) 2node Bobcat cluster to 2node Cougar cluster.
> >=20
> > =20
> >=20
> > Topology:
> >=20
> > Direct Connect (point to point)
> >=20
> > Fabric (Loop)
> >=20
> > Storage: NEXSAN (8 disks)
> >=20
> > Fabric switch: Qlogic sanbox
> >=20
> > =20
> >=20
> > Procedure fallowed=20
> >=20
> > =20
> >=20
> > 1) Do a flash install of R3.0.0.4 on bobcat
> >=20
> > 2) Create configuration consists of=20
> >=20
> >       a) 10 VSVRS
> >=20
> >       b) lports
> >=20
> >       c) Base Volume
> >=20
> >       d) Hourly snapshot schedule
> >=20
> >       e) Hourly Local Mirror
> >=20
> >       f) Hourly DMIP Mirror across another Gateway
> >=20
> > 3) "system copy all -i" to a secondary flash (512mb)
> >=20
> > 4) Shutdown bobcat NAS Gateway
> >=20
> > =20
> >=20
> > ON Cougar (Move the corresponding sp2.x and fP1.x cables from bobcat
> > to Cougar either direct or by using switch)=20
> >=20
> > 5) Do a flash install of R4.0.0.0-FTI-032208 on Cougar
> >=20
> > 6) Place the 512MB CF in secondary CF slot on Cougar
> >=20
> > 7) Boot the cougar (Falls into FTI menu)
> >=20
> > 8) "Answer 'Y' to copy configuration from secondary flash"
> >=20
> > 9) Filer reboots after copying=20
> >=20
> > =20
> >=20
> > ## After Cougar NAS Gateway comes up
> >=20
> > 10) run "scsi discover lun all"
> >=20
> > 11) lun show all (verify all ports are up)=20
> >=20
> > 12) New management VSVR is created
> >=20
> > 13) Delete the old vsvr (Old vsvr id < new management vsvr id)
> >=20
> > 14) Clients may require remount of stale mount points=20
> >=20
> > =20
> >=20
> > =20
> >=20
> > Any questions and any tests need to be run, please let me=20
> know before
> > I de-install the configuration.
> >=20
> > =20
> >=20
> > Draft Migration test procedure is under review.
> >=20
> > =20
> >=20
> > Thanks
> >=20
> > Manny
> >=20
> > =20
> >=20
> > =20
> >=20
> > -----Original Message-----
> >=20
> > From: Vikas Saini=20
> >=20
> > Sent: Friday, March 28, 2008 5:41 PM
> >=20
> > To: Manohar Divate; John Keiffer; Selvakumar Balu
> >=20
> > Cc: Sandrine Boulanger; Vikas Saini
> >=20
> > Subject: IMPORTANT : FTI/migration in branch testing update
> >=20
> > Importance: High
> >=20
> > =20
> >=20
> > =20
> >=20
> > =20
> >=20
> > Hi Guys,
> >=20
> >   Following areas needs to be verified for FTI,NCM,bobcat-cougar
> > migration testing before we authorize the merge of that code to Dev
> > branch.
> >=20
> > =20
> >=20
> > =20
> >=20
> > 1) FTI on Cougar (John k is working on it.)
> >=20
> > 2) NCM based first install for Cougar (John K, did we start it ?)
> >=20
> > 3) Bobcat to Cougar migration.( Manny, where we are regarding this)
> >=20
> > 4) FTI on bobcat (HCL )
> >=20
> > 5) NCM based first install for bobcat  (HCL)
> >=20
> > 6) system commands for both bobcat and cougar at root and admin
> > level.(including system upgrade and verify that we don't get FTI
> > screen after upgrade) (for Cougar Manny can you execute these
> > commands and for bobcat, Selva please take care of this)
> >=20
> > =20
> >=20
> > =20
> >=20
> > =20
> >=20
> > For all the above items, we just want to make sure that the basic
> > functionality is working. We don't need to run all test cases.=20
> >=20
> > =20
> >=20
> > Please provide the update by Monday noon as Dev was asking whether
> > they can merge the code in next Tuesday's submittal.
> >=20
> > =20
> >=20
> > =20
> >=20
> > Source code is located here:
> >=20
> > =20
> >=20
> > /n/Build-Trees/R4.0.0.0/R4.0.0.0-FTI-032208
> >=20
> > =20
> >=20
> > Installable Images are here:
> >=20
> > =20
> >=20
> > Cougar Debug:
> >=20
> > ftp://upgrade:password@10.2.0.2/R4.0.0.0-FTICGDBG-032208.tar.gz
> >=20
> > =20
> >=20
> > Cougar Opt:
> >=20
> > ftp://upgrade:password@10.2.0.2/R4.0.0.0-FTICG-032208.tar.gz
> >=20
> > =20
> >=20
> > Just in case you need to check something on the other platforms:
> >=20
> > =20
> >=20
> > Bobcat Debug:
> >=20
> > ftp://upgrade:password@10.2.0.2/R3.3.0.0-FTIBCDBG-032208.tar.gz
> >=20
> > =20
> >=20
> > Bobcat Opt:
> >=20
> > ftp://upgrade:password@10.2.0.2/R3.3.0.0-FTIBC-032208.tar.gz
> >=20
> > =20
> >=20
> > Cheetah Debug:
> >=20
> > ftp://upgrade:password@10.2.0.2/R3.3.0.0-FTIDBG-032208.tar.gz
> >=20
> > =20
> >=20
> > =20
> >=20
> > Cheetah Opt:
> >=20
> > ftp://upgrade:password@10.2.0.2/R3.3.0.0-FTI-032208.tar.gz
> >=20
> > =20
> >=20
> > =20
> >=20
> > Thanks
> >=20
> > Vikas
> >=20
> > =20
> >=20
> > =20
> >=20
>=20
