X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: by onstor-exch02.onstor.net 
	id <01C854A2.7CBAC963@onstor-exch02.onstor.net>; Fri, 11 Jan 2008 15:37:03 -0700
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-class: urn:content-classes:message
Subject: RE: startup from CF
Date: Fri, 11 Jan 2008 15:37:03 -0700
Message-ID: <BB375AF679D4A34E9CA8DFA650E2B04E079AC51C@onstor-exch02.onstor.net>
In-Reply-To: <20080111135134.19dc1a54@ripper.onstor.net>
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
Thread-Topic: startup from CF
Thread-Index: AchUnCGfOjY+88OlSoeogz0E9NLRewABhcmA
References: <BB375AF679D4A34E9CA8DFA650E2B04E079AC3F6@onstor-exch02.onstor.net> <20080111135134.19dc1a54@ripper.onstor.net>
From: "Rick Lund" <IMCEAEX-_O=ONSTOR_OU=FIRST+20ADMINISTRATIVE+20GROUP_CN=RECIPIENTS_CN=RICK+2ELUND@onstor.com>
To: "Andy Sharp" <andy.sharp@onstor.com>
Cc: "Brian Stark" <brian.stark@onstor.com>,
	"Larry Scheer" <larry.scheer@onstor.com>

You can use the system if you want to check it out.

SSC port on 10.1.1.100 2001

The IP addr is 10.1.1.125

-Rick

-----Original Message-----
From: Andy Sharp=20
Sent: Friday, January 11, 2008 1:52 PM
To: Rick Lund
Cc: Brian Stark; Larry Scheer
Subject: Re: startup from CF

On Fri, 11 Jan 2008 12:07:37 -0800 "Rick Lund" <rick.lund@onstor.com>
wrote:

> Andy,
>   Here's the startup sequence with the new CF and my fixes for the
> autoload.  It hangs during runlevel 2 init for quite a while.
>=20
> Do you expect that?

It didn't happen to me when I booted one of the CF cards I gave you.
Does it do this on both cards?  Basically, something is hosed with
the /var partition; the long delay is fsck being run on a hosed
filesystem.  Are you definitely using one of the cards I gave you?  If
so, can you use dd to make a copy of it and send me a pointer to it so I
can check it out?

> -Rick
>=20
>=20
>=20
> Linux version 2.6.22-cg (larrys@linux-compile.onstor.net) (gcc version
> 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Tue Jan 8 15:45:51
> PST 2008
> Booting Linux kernel...Mips64 Cougar
> cougar_pmon_init: argc=3D3, arg=3Dffffffff80bf4410, =
env=3Dffffffff80b7bbc8
> prom_init: env[0] =3D 'cpuclock=3D4894967296'
> prom_init: env[1] =3D 'memsize=3D512'
> prom_init: env[2] =3D 'osloadoptions=3DmAt'
> prom_init: env[3] =3D 'boot=3Dcold'
> prom_init: env[4] =3D 'busclock=3D600'
> prom_init: env[5] =3D 'ipaddr=3D10.1.1.124'
> prom_init: env[6] =3D 'netmask=3D255.255.0.0'
> prom_init: env[7] =3D 'macaddr0=3D00:07:34:10:04:00'
> prom_init: env[8] =3D 'macaddr1=3D00:07:34:10:04:01'
> prom_init: env[9] =3D 'bootdev=3D/dev/sda1'
> CPU revision is: 00040103
> FPU revision is: 000f0103
> Broadcom SiByte BCM1125H A4 @ 600 MHz (SB1 rev 3)
> Board type: ONStor Cougar
> This kernel optimized for ONStor Cougar board without CFE
> Determined physical RAM map:
>  memory: 0000000002000000 @ 0000000000000000 (ROM data)
>  memory: 000000000e000000 @ 0000000002000000 (usable)
>  memory: 000000000f000000 @ 0000000080000000 (usable)
>  memory: 0000000001000000 @ 000000008f000000 (reserved)
> Wasting 458752 bytes for tracking 8192 unused pages
> Built 1 zonelists.  Total pages: 577720
> Kernel command line: console=3Dduart0,57600n8 ip=3Ddhcp =
root=3D/dev/sda1
> ip=3Dnone
> Primary instruction cache 32kB, 4-way, linesize 32 bytes.
> Primary data cache 32kB, 4-way, linesize 32 bytes.
> Secondary cache 256kB, 4-way, linesize 32 bytes.
> Synthesized TLB refill handler (38 instructions).
> Synthesized TLB load handler fastpath (49 instructions).
> Synthesized TLB store handler fastpath (49 instructions).
> Synthesized TLB modify handler fastpath (48 instructions).
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Using 1.000 MHz high precision timer.
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Memory: 433408k/475136k available (2202k kernel code, 41556k reserved,
> 690k data, 112k init, 0k highmem)
> Mount-cache hash table entries: 256
> Checking for the multiply/shift bug... no.
> Checking for the daddi bug... no.
> Checking for the daddiu bug... no.
> NET: Registered protocol family 16
> SCSI subsystem initialized
> PCI: Bus 1, cardbus bridge: 0000:00:07.0
>   IO window: 00008000-000080ff
>   IO window: 00008400-000084ff
>   PREFETCH window: 44000000-47ffffff
>   MEM window: 48000000-4bffffff
> PCI: Bus 5, cardbus bridge: 0000:00:07.1
>   IO window: 00008800-000088ff
>   IO window: 00008c00-00008cff
>   PREFETCH window: 4c000000-4fffffff
>   MEM window: 50000000-53ffffff
> Time: MIPS clocksource has been installed.
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> SiByte Watchdog: timeout is 8.3 secs
> eth0: enabling TCP rcv checksum
> eth0: SiByte Ethernet at 0x10064000, address: 00:07:34:10:04:00
> eth1: enabling TCP rcv checksum
> eth1: SiByte Ethernet at 0x10065000, address: 00:07:34:10:04:01
> Yenta: CardBus bridge found at 0000:00:07.0 [0000:0000]
> Yenta: Enabling burst memory read transactions
> Yenta: Using INTVAL to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:00:07.0, mfunc 0x00000022, devctl 0x60
> Yenta: ISA IRQ mask 0x0000, PCI irq 56
> Socket status: 30000059
> pcmcia: parent PCI bridge I/O window: 0x0 - 0x1ffffff
> cs: IO port probe 0x0-0x1ffffff: clean.
> pcmcia: parent PCI bridge Memory window: 0x41000000 - 0x5fffffff
> Yenta: CardBus bridge found at 0000:00:07.1 [0000:0000]
> Yenta: Using INTVAL to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:00:07.1, mfunc 0x00000022, devctl 0x60
> Yenta: ISA IRQ mask 0x0000, PCI irq 57
> Socket status: 30000059
> pcmcia: parent PCI bridge I/O window: 0x0 - 0x1ffffff
> cs: IO port probe 0x0-0x1ffffff: clean.
> pcmcia: parent PCI bridge Memory window: 0x41000000 - 0x5fffffff
> pccard: PCMCIA card inserted into slot 0
> cs: memory probe 0x41000000-0x5fffffff: excluding
> 0x41000000-0x417fffff 0x44000000-0x53ffffff
> pcmcia: registering new device pcmcia0.0
> scsi0 : pata_pcmcia
> ata1: PATA max PIO0 cmd 0x90000000dc000000 ctl 0x90000000dc00000e
> bmdma 0x0000000000000000 irq 56
> ds1511 ds1511: rtc core: registered ds1511 as rtc0
> MGMTBUS: using irq 28
> MGMTBUS: registered net device mgmtbus @ 900000008f000000
> rcon device will be in the hizzy @ 900000008f0000e0
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> NET: Registered protocol family 30
> ds1511 ds1511: setting the system clock to 2008-01-11 11:58:04
> (1200052684)
> ata1.00: CFA: CF 1GB, 06/07/29, max PIO2
> ata1.00: 2060352 sectors, multi 0: LBA
> ata1.00: configured for PIO0
> scsi 0:0:0:0: Direct-Access     ATA      CF 1GB           06/0 PQ: 0
> ANSI: 5
> sd 0:0:0:0: [sda] 2060352 512-byte hardware sectors (1055 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 2060352 512-byte hardware sectors (1055 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
> support DPO or FUA
>  sda: sda1 sda2 sda3 sda4
> sd 0:0:0:0: [sda] Attached SCSI removable disk
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> pccard: PCMCIA card inserted into slot 1
> cs: memory probe 0x41000000-0x5fffffff: excluding
> 0x41000000-0x41ffffff 0x44000000-0x53ffffff
> pcmcia: registering new device pcmcia1.0
> scsi1 : pata_pcmcia
> ata2: PATA max PIO0 cmd 0x90000000dc000010 ctl 0x90000000dc00001e
> bmdma 0x0000000000000000 irq 57
> ata2.00: CFA: CF 512MB, 06/07/29, max PIO2
> ata2.00: 1028160 sectors, multi 0: LBA
> ata2.00: configured for PIO0
> scsi 1:0:0:0: Direct-Access     ATA      CF 512MB         06/0 PQ: 0
> ANSI: 5
> sd 1:0:0:0: [sdb] 1028160 512-byte hardware sectors (526 MB)
> sd 1:0:0:0: [sdb] Write Protect is off
> sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 1:0:0:0: [sdb] 1028160 512-byte hardware sectors (526 MB)
> sd 1:0:0:0: [sdb] Write Protect is off
> sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't
> support DPO or FUA
>  sdb: sdb1 sdb2 sdb3 sdb4
> sd 1:0:0:0: [sdb] Attached SCSI removable disk
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 112k freed
> INIT: version 2.86 booting
> Starting the hotplug events dispatcher: udevd.
> Synthesizing the initial hotplug events...done.
> Waiting for /dev to be fully populated...done.
> Setting parameters of disc: (none).
> Activating swap...Unable to find swap-space signature
> failed.
> EXT3 FS on sda1, internal journal
> Setting the system clock..
> Cleaning up ifupdown....
> Loading kernel modules...done.
> Loading device-mapper support.
> Checking file systems...fsck 1.40-WIP (14-Nov-2006)
> done.
> Setting kernel variables...done.
> Mounting local filesystems...ext3: No journal on filesystem on sdb3
> mount: wrong fs type, bad option, bad ext3: No journal on filesystem
> on sdb4
> superblock on /dev/sdb3,
>        missing codepage or other error
>        In some cases useful info is found in syslog - try
>        dmesg | tail  or so
>=20
> mount: wrong fs type, bad option, bad superblock on /dev/sdb4,
>        missing codepage or other error
>        In some cases useful info is found in syslog - try
>        dmesg | tail  or so
>=20
> failed.
> Activating swapfile swap...Unable to find swap-space signature
> done.
> Starting ONStor initial configuration utility:Removing
> /var/log/initial-config.log file.
> rm: cannot remove `/var/log/initial-config.log': No such file or
> directory
> tee: /var/log/initial-config.log: No such file or directory
>=20
>=20
>=20
>=20
> Welcome to the ONStor NAS Gateway Initial Configuration Tool
>=20
>=20
>=20
> [Then, after doing the config....]
>=20
>=20
> Are you sure you do want to exit without configuring
> these settings? (Yes or No) y
> .
> Setting up networking....
> Configuring network interfaces...done.
> Starting portmap daemon....
> /etc/rcS.d/S55bootmisc.sh: line 28: /var/run/utmp: No such file or
> directory
> INIT: Entering runlevel: 2
> Starting system log daemon: syslogd  [And it hangs here for quite a
> while, but then finishes after a few minutes]
>=20
>=20
>=20
