AF:
NF:0
PS:10
SRH:1
SFN:
DSR:
MID:<20080721171236.20530bad@ripper.onstor.net>
CFG:
PT:0
S:andy.sharp@onstor.com
RQ:
SSV:onstor-exch02.onstor.net
NSV:
SSH:
R:<xian.hong@onstor.com>,<ed.kwan@onstor.com>,<escal@onstor.com>
MAID:1
X-Sylpheed-Privacy-System:
X-Sylpheed-Sign:0
SCF:#mh/Mailbox/sent
RMID:#imap/andys@onstor.net@onstor-exch02.onstor.net/INBOX	0	2779531E7C760D4491C96305019FEEB514A185F12B@exch1.onstor.net
X-Sylpheed-End-Special-Headers: 1
Date: Mon, 21 Jul 2008 17:12:48 -0700
From: Andrew Sharp <andy.sharp@onstor.com>
To: "Xian Hong" <xian.hong@onstor.com>
Cc: "Ed Kwan" <ed.kwan@onstor.com>, "dl-Escalation" <escal@onstor.com>
Subject: Re: Defect  Yes TED00024828 Nfxsh system report "rmc_pm_dispatch():
 sess{:pm.0.0} down" Sybase
Message-ID: <20080721171248.6c934b61@ripper.onstor.net>
In-Reply-To: <2779531E7C760D4491C96305019FEEB514A185F12B@exch1.onstor.net>
References: <ONSTOR-EXCH01WSfQ5u00002fc0@onstor-exch01.onstor.net>
	<BB375AF679D4A34E9CA8DFA650E2B04E0AFF19B8@onstor-exch02.onstor.net>
	<20080721163457.0f6dd4e8@ripper.onstor.net>
	<2779531E7C760D4491C96305019FEEB514A185F12B@exch1.onstor.net>
Organization: Onstor
X-Mailer: Sylpheed-Claws 2.6.0 (GTK+ 2.8.20; x86_64-pc-linux-gnu)
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

On Mon, 21 Jul 2008 16:43:31 -0700 "Xian Hong" <xian.hong@onstor.com>
wrote:

> Hi Andy, 
> It's 3.1.1.1.
> 
> It's at customer site. How to do flash_install?  
> 
> If the following steps work?
> 
> 1. Setup nfs server
> 2. Unzip the EverON-3.1.1.1BC.tar.gz.gz file into a directory
> 3. And mount the directory as /mnt
> 4. Then /etc/flash_install.sh

4. cd /mnt/etc; ./flash_install.sh

Ed is right, it takes around 30 minutes on a bobcat.  Forgot that for a
second.

~:^)

> 
> Thanks,
> Hong
> 
> -----Original Message-----
> From: Andy Sharp 
> Sent: Tuesday, July 22, 2008 7:35 AM
> To: Ed Kwan
> Cc: Xian Hong; dl-Escalation
> Subject: Re: Defect Yes TED00024828 Nfxsh system report
> "rmc_pm_dispatch(): sess{:pm.0.0} down" Sybase
> 
> On Mon, 21 Jul 2008 16:12:48 -0700 "Ed Kwan" <ed.kwan@onstor.com>
> wrote:
> 
> > > ifconfig: localhost: bad value
> > > route: shrd-onstor2: bad value
> >
> > Any ideas why they are bad?  Bogus input during Initial
> > Configuration? Try removing the files from the BSD shell:
> >
> > /usr/local/agile/conf/cluster.db.DB0
> > /usr/local/agile/conf/cluster.conf
> 
> Not in the clusterdb.
> 
> Check the files /etc/hostname.sc1 and sc2, and /etc/mygate.  Almost
> looks like they are hosed some how.
> 
> Correct me if I'm wrong, but isn't there a later version than 3.1.1.1?
> Perhaps do a flash_install of the latest version to clear out all this
> bogasity in various files that seem to somehow have gotten messed up.
> A flash made with flash_install will start with the initial config.
> 
> > And reboot.
> >
> > > -----Original Message-----
> > > From: xian.hong@onstor.com [mailto:xian.hong@onstor.com]
> > > Sent: Monday, July 21, 2008 4:04 PM
> > > To: dl-Escalation
> > > Cc: Andy Sharp; Xian Hong
> > > Subject: Defect Yes TED00024828 Nfxsh system report
> > "rmc_pm_dispatch():
> > > sess{:pm.0.0} down" Sybase
> > >
> > > company_name: Sybase
> > > id: TED00024828
> > > Headline: Nfxsh system report "rmc_pm_dispatch(): sess{:pm.0.0}
> > > down" State: Opened
> > > Note_Entry: error messages during boot:
> > > =================================================================
> > > PowerOn Self Test........OK
> > >
> > > Initializing System......please wait
> > >
> > > Initializing Shared Memory (1024 MB) for ECC
> > > Taking PCI out of reset.
> > > Waiting for FP/TXRX out of reset......
> > >
> > >
> > >
> > >
> > > PMON [SSC,EL,FP]
> > > ONStor Inc. PROM_R9000 : prom-2.0.7 : Fri Mar 21 11:13:49 2008
> > > CPU type R9000.  Rev 4.0.  799.98 MHz/133 MHz.
> > > module: SSC, Slot 0, CPU 0
> > > Memory size 1024 MB.
> > > Icache size  16 KB, 32/line (4 way)
> > > Dcache size  16 KB, 32/line (4 way)
> > > Scache size 256 KB, 32/line  (4 way)
> > > Initializing Autoloader, hit control-E to bypass
> > >
> >
> ........................................................................
> > ..
> > > ......
> > >
> > > Type ctrl-e to stop autoload.
> > > Waiting for SSC to enter autoload init state...done.
> > > disk model: CF 512MB
> > > disk geometry: cylinders=1020 heads=16 sectors=63
> > > 0x83000000:0x12ea70, Zero 0x8312ea70:0x2438c0, start at 0x83000080
> > > Type ctrl-e to stop autoload.
> > > Waiting for TXRX to enter autoload init state...done.
> > > disk model: CF 512MB
> > > disk geometry: cylinders=1020 heads=16 sectors=63
> > > Loaded /dev/wd0a/txrx_bc.bin at 9a000000 length 5566816
> > > Type ctrl-e to stop autoload.
> > > Waiting for FP to enter autoload init state...done.
> > > disk model: CF 512MB
> > > disk geometry: cylinders=1020 heads=16 sectors=63
> > > Loaded /dev/wd0a/fp_bc.bin at 9b000000 length 5544488
> > > Type ctrl-e to stop autoload.
> > > Waiting for FC to enter autoload init state...done.
> > > disk model: CF 512MB
> > > disk geometry: cylinders=1020 heads=16 sectors=63
> > > Loaded /dev/wd0a/fc_bc.bin at 13000000 length 1100748
> > > argc = 2
> > > startvectors=0x13000000 stack =0x80388408
> > >  -- Do BSD launch (argc = 0)
> > >
> > > env[0] = 803894c8:.cpuclock=799978878.
> > > env[1] = 80389518:.memsize=512.
> > > env[2] = 80389568:.osloadoptions=mAt.
> > > env[3] = 803895b8:.boot=cold.
> > > env[4] = 80389608:.busclock=133.
> > > env[5] = 80389658:.ipaddr=.
> > > env[6] = 803896a8:.netmask=255.255.255.0.
> > > env[7] = 803896f8:.macaddr0=.00:07:34:06:7c:00.
> > > env[8] = 80389748:.macaddr1=.00:07:34:06:7c:01.
> > > env[9] = 80389798:.bootdev=/dev/wd0a.
> > >  pointer to Prom Util routines = BFC00540
> > >  Command should be  (addr)(argc, argv, env_strings,
> > > ptr_prom_util_routines)
> > >
> > >
> > > Copyright (c) 1982, 1986, 1989, 1991, 1993
> > >         The Regents of the University of California.  All rights
> > reserved.
> > > Copyright (c) 1995-2000 OpenBSD. All rights reserved.
> > > http://www.OpenBSD.org
> > >
> > > kmem_init: start c02e9000 end c6e20000 size 6b37000
> > > OpenBSD 2.8 (BOBCAT) #0: Fri May 16 16:42:52 PDT 2008
> > >     build@k2:/usr/openbsd.new/src/sys/arch/pmonmips/compile/BOBCAT
> > > real mem = 264241152
> > > buffers = c16ed000 base = 8 residual = 0 nbuf = 196 bufpages = cb0
> > > MAXBSIZE = 8000 CLBYTES = 1000
> > > marvel_mem_init: marvel_va = f0000000 marvel_pa = 40000000
> > > avail mem = 238739456 (bytes) (227 MBs)
> > > using 406 buffers containing 13303808 bytes of memory
> > > mainbus0 (root)
> > > cpu0 at mainbus0: RM9000 CPU Rev. 4.0 with RM9000 FPC Rev. 2.0
> > >         L1 Cache: I size 16kb(32 line), D size 16kb(32 line), four
> > way.
> > >         L2 Cache: Size 256kb, four way
> > > localbus0 at mainbus0
> > > clock0 at localbus0: mc146818 or compatible
> > > galileo match: device id 6480, vendor id = 11ab
> > > galileo0 at mainbus0: GT-64440
> > > pcibr0 at galileo0
> > > PCI BRIDGE: pcibr at bus 1
> > > pci0 at pcibr0 bus 1
> > > sc1 at pci0 dev 0 function 0 vendor 0x100b product 0x0020 rev 0x00
> > > SIS_ATTACH: set_intr() unit = 1, pri = 7, line = 10000, irq = 7
> > > SIS_ATTACH: reset
> > >  address 00:07:34:06:7c:00
> > > ukphy0 at sc1 phy 0: Generic IEEE 802.3u media interface
> > > ukphy0: OUI 0x080017, model 0x0002, rev. 1
> > > sc2 at pci0 dev 1 function 0 vendor 0x100b product 0x0020 rev 0x00
> > > SIS_ATTACH: set_intr() unit = 2, pri = 8, line = 20000, irq = 8
> > > SIS_ATTACH: reset
> > >  address 00:07:34:06:7c:01
> > > ukphy1 at sc2 phy 0: Generic IEEE 802.3u media interface
> > > ukphy1: OUI 0x080017, model 0x0002, rev. 1
> > > pcic0 at pci0 dev 2 function 0 vendor 0x104c product 0xac55 rev
> > > 0x01 pcic0 controller 0: <Intel 82365SL rev 0> has sockets A and B
> > > pcmcia0 at pcic0 controller 0 socket 0
> > > wdc0 at pcmcia0 function 0 "Wintec Industries, CF 512MB" port
> > > 0x400/16 wd0 at wdc0 channel 0 drive 0: <CF 512MB>
> > > wd0: can use 16-bit, PIO mode 0
> > > wd0: 1-sector PIO, LBA, 502MB, 1020 cyl, 16 head, 63 sec, 1028160
> > sectors
> > > pcmcia1 at pcic0 controller 0 socket 1
> > > wdc1 at pcmcia1 function 0 "Wintec Industries, CF 512MB" port
> > > 0x800/16 wd1 at wdc1 channel 0 drive 0: <CF 512MB>
> > > wd1: can use 16-bit, PIO mode 0
> > > wd1: 1-sector PIO, LBA, 502MB, 1020 cyl, 16 head, 63 sec, 1028160
> > sectors
> > > pcic0: no irq, polling enabled
> > > gtuart0 at galileo0
> > > gtuart0: console attached
> > > prom0 at galileo0
> > > prom1 at galileo0
> > > da=0 cntr=0
> > > boot device: wd0.
> > > root on wd0a
> > > swp=8312e9dc swp->sw_dev=1025 m=4
> > > clock_alt_init: IDLE_MASK & IC_INT_TIMR = 1000
> > > mgmtbus0: 16777216 bytes at phys 0x400c4000
> > > rootdev=0x400 rrootdev=0x1200 rawdev=0x1202
> > > Automatic boot in progress: starting file system checks.
> > > /dev/rwd0a: file system is clean; not checking
> > > /dev/rwd0d: file system is clean; not checking
> > > /dev/rwd0e: file system is clean; not checking
> > > /dev/rwd0f: file system is clean; not checking
> > > swapon: adding /dev/wd0b as swap device at priority 0
> > > setting tty flags
> > > net.inet.ip.portfirst: 1024 -> 2100
> > > kern.nosuidcoredump: 1 -> 0
> > > starting network
> > > ifconfig: localhost: bad value
> > > <--------------------------error
> > > route: shrd-onstor2: bad value
> > > <--------------------------error
> > > writing to routing socket: Network is unreachable
> > > add net default: gateway 10.42.35.1
> > > writing to routing socket: Network is unreachable
> > > starting system logger
> > > starting rpc daemons: portmap ypserv ypbindunable to register
> > (YPBINDPROG,
> > > YPBINDVERS, udp)..
> > > savecore: no core dump
> > > building ps databases: kvm dev.
> > > clearing /tmp
> > > starting pre-securelevel daemons: tickadj.
> > > setting kernel security level: kern.securelevel: 0 -> 1
> > > remounting root read-only...done.
> > > starting network daemons: inetd sshd.
> > > starting local daemons: ntpdate ntpd.
> > > starting agile daemons: mgmtbus0/usr/local/agile/bin/emrscron -f
> > >  pm.
> > > created /tmp/ramdisk
> > > starting mount_mfs: done
> > > standard daemons: cron.
> > > checking domain name [SANfiler]...
> > >
> > > % Unknown command/option.
> > > <--------------------------error
> > > % Unknown command/option.
> > > <--------------------------error
> > >     Running system command : cat /var/config/version
> > >     Getting elogs
> > >     Uploading file NFX_EVENT_NODE-20080721_02320994.xml.gz..  OK
> > > failed
> > > Mon Jul 21 02:32:16 PDT 2008
> > >
> > > login: root
> > > Password:
> > > Last login: Mon Jul 21 02:26:36 on ttyp0 from 10.42.35.175
> > > OpenBSD 2.8 (BOBCAT) #0: Fri May 16 16:42:52 PDT 2008
> > >
> > > Terminal type? [vt220]
> > > shrd-onstor2#
> > > shrd-onstor2#
> > > shrd-onstor2# nfxsh
> > >
> > > Welcome to the ONStor NAS Gateway.
> > >
> > > shrd-onstor2 diag>
> > > shrd-onstor2 diag>
> > > shrd-onstor2 diag> cl sh crmc_pm_dispatch(): sess{:pm.0.0} down
> > > <--------------------------error
> > > l
> > >
> > > rmc_pm_dispatch(): sess{:pm.0.0} down
> > > rmc_pm_dispatch(): sess{:pm.0.0} down
> > > rmc_pm_dispatch(): sess{:pm.0.0} down
> > > rmc_pm_dispatch(): sess{:pm.0.0} down
> > > rmc_pm_dispatch(): sess{:pm.0.0} down
> > > Release_Project: 3.1.1.1
> >
> 
