AF:
NF:0
PS:10
SRH:1
SFN:
DSR:
MID:<20070516135429.5717a1da@ripper.onstor.net>
CFG:
PT:0
S:andy.sharp@onstor.com
RQ:
SSV:onstor-exch02.onstor.net
NSV:
SSH:
R:<john.keiffer@onstor.com>,<larry.scheer@onstor.com>,<sandrine.boulanger@onstor.com>
MAID:1
X-Sylpheed-Privacy-System:
X-Sylpheed-Sign:0
SCF:#mh/Mailbox/sent
RMID:#imap/andys@onstor.net@onstor-exch02.onstor.net/INBOX	0	BB375AF679D4A34E9CA8DFA650E2B04E03C0BC1C@onstor-exch02.onstor.net
X-Sylpheed-End-Special-Headers: 1
Date: Wed, 16 May 2007 13:55:55 -0700
From: Andrew Sharp <andy.sharp@onstor.com>
To: "John Keiffer" <john.keiffer@onstor.com>
Cc: "Larry Scheer" <larry.scheer@onstor.com>, "Sandrine Boulanger"
 <sandrine.boulanger@onstor.com>
Subject: Re: flash_install.sh failure
Message-ID: <20070516135555.3cc3c8bc@ripper.onstor.net>
In-Reply-To: <BB375AF679D4A34E9CA8DFA650E2B04E03C0BC1C@onstor-exch02.onstor.net>
References: <BB375AF679D4A34E9CA8DFA650E2B04E03C0BC1C@onstor-exch02.onstor.net>
Organization: Onstor
X-Mailer: Sylpheed-Claws 2.6.0 (GTK+ 2.8.20; x86_64-pc-linux-gnu)
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Ouch, some kind of hardware problem, but I can't tell exactly what.
I'm more concerned, actually, that the script didn't properly handle the
failure.  Please file a bug against that at the very least.

Did you reboot the filer in between the attempts?

Cheetah or Bobcat?

Thanks,

a

On Wed, 16 May 2007 13:17:01 -0700 "John Keiffer"
<john.keiffer@onstor.com> wrote:

> I tried to do a flash_install.sh, and I got the failure below. I
> repeated the same command a second time and then it worked. Any ideas
> why it failed the first time?
> 
>  
> 
> # mount
> 
> /dev/wd0a on / type ffs (local, noatime, read-only)
> 
> /dev/wd0e on /tmp type ffs (local)
> 
> /dev/wd0d on /usr type ffs (local, noatime, read-only)
> 
> /dev/wd0g on /usr/local/agile type ffs (local, noatime, read-only)
> 
> /dev/wd0f on /var type ffs (local)
> 
> /dev/wd0h on /usr/local/agile/conf type ffs (local)
> 
> mfs:30030 on /dev type mfs (asynchronous, local, noatime, union,
> size=1000 1K-blocks)
> 
> mfs:4700 on /tmp/ramdisk type mfs (asynchronous, local, noatime,
> union, size=5120 1K-blocks)
> 
> 10.0.0.236:/nx-d_buildup/build-trees/R3.0.0.0/R3.0.0.0-051407/nfx-tree/B
> uild/bc/opt/Relea on /mnt type nfs (v3, udp, timeo=100)
> 
>  
> 
> # /mnt/etc/flash_install.sh /mnt 1
> 
> You are about to format the SECOND compact flash card.
> 
> You have 3 seconds to hit CTRL-C if this is not what you want.
> 
> CF card is 488 MiB
> 
> Creating new disk label cf488.label
> 
> /dev/rwd1a:     643104 sectors in 638 cylinders of 16 tracks, 63
> sectors
> 
>         314.0MB in 40 cyl groups (16 c/g, 7.88MB/g, 1920 i/g)
> 
> /dev/rwd1d:     159264 sectors in 158 cylinders of 16 tracks, 63
> sectors
> 
>         77.8MB in 10 cyl groups (16 c/g, 7.88MB/g, 1920 i/g)
> 
> cg 0: bad magic number
> 
> cg 0: bad magic number
> 
> FAIL: Format/install of compact flash in slot 1 failed.
> 
> Do you wish for this flash to automatically copy
> 
> the configuration from the other flash at boot time
> 
> rather than running the initial config menu? [N] n
> 
> Is this an upgrade? If you answer yes the current configuration
> 
> will be copied to the new flash [N] n
> 
> I'll take n as a 'No' and not copy the configuration to the new flash.
> 
>  
> 
> #
> 
>  
> 
> Thank you,
> 
> John Keiffer
> 
>  
> 
>  
> 
