AF:
NF:0
PS:10
SRH:1
SFN:
DSR:
MID:<20070724110131.37a918a8@ripper.onstor.net>
CFG:
PT:0
S:andy.sharp@onstor.com
RQ:
SSV:onstor-exch02.onstor.net
NSV:
SSH:
R:<maxim.kozlovsky@onstor.com>
MAID:1
X-Sylpheed-Privacy-System:
X-Sylpheed-Sign:0
SCF:#mh/Mailbox/sent
RMID:#imap/andys@onstor.net@onstor-exch02.onstor.net/INBOX	0	BB375AF679D4A34E9CA8DFA650E2B04E049DF0FD@onstor-exch02.onstor.net
X-Sylpheed-End-Special-Headers: 1
Date: Tue, 24 Jul 2007 11:01:44 -0700
From: Andrew Sharp <andy.sharp@onstor.com>
To: "Maxim Kozlovsky" <maxim.kozlovsky@onstor.com>
Subject: Re: Problem with the new bobcat-config
Message-ID: <20070724110144.60ef2cd0@ripper.onstor.net>
In-Reply-To: <BB375AF679D4A34E9CA8DFA650E2B04E049DF0FD@onstor-exch02.onstor.net>
References: <BB375AF679D4A34E9CA8DFA650E2B04E049DF0FD@onstor-exch02.onstor.net>
Organization: Onstor
X-Mailer: Sylpheed-Claws 2.6.0 (GTK+ 2.8.20; x86_64-pc-linux-gnu)
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

do a make clean and then rebuild the kernel.  make sure your .config
and bobcat-config are in sync.

On Tue, 24 Jul 2007 10:58:28 -0700 "Maxim
Kozlovsky" <maxim.kozlovsky@onstor.com> wrote:

> It reports some pagefault and hangs. Did you by any change forget to
> check in some files?
> 
> Booting Linux kernel...
> prom_init: env[0] = 'cpuclock=799988250'
> prom_init: env[1] = 'memsize=512'
> prom_init: env[2] = 'osloadoptions=mAt'
> prom_init: env[3] = 'boot=cold'
> prom_init: env[4] = 'busclock=133'
> prom_init: env[5] = 'ipaddr=10.2.204.1'
> prom_init: env[6] = 'netmask=255.255.0.0'
> prom_init: env[7] = 'macaddr0=00:07:34:02:33:00'
> prom_init: env[8] = 'macaddr1=00:07:34:02:33:01'
> Linux version 2.6.21-rc4-bc9k (maximk@compile2.onstor.net) (gcc
> version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #178 Tue Jul
> 24 10:44:31 PDT 2007
> CPU revision is: 00003440
> FPU revision is: 00003420
> OnStor Bobcat: Board Assembly Rev. A4
> Booting from recovery prom
> Bus clock speed: 133MHz
> Determined physical RAM map:
>  memory: 03000000 @ 00000000 (ROM data)
>  memory: 0d000000 @ 03000000 (usable)
>  memory: 10000000 @ 20000000 (reserved)
>  memory: 40000000 @ 40000000 (reserved)
> Wasting 393216 bytes for tracking 12288 unused pages
> Built 1 zonelists.  Total pages: 52736
> Kernel command line: console=ttyS0,57600n8 console=ttyMM0,57600n8
> root=/dev/nfs nfsroot=10.0.0.23:/var/nfsroot/max,v3,tcp
> ip=10.2.10.2:10.0.0.23:10.2.0.1:255.255.0.0:eng131:eth0:none
> Primary instruction cache 16kB, physically tagged, 4-way, linesize 32
> bytes.
> Primary data cache 16kB, 4-way, linesize 32 bytes.
> Secondary cache size 256K, linesize 32 bytes.
> Synthesized TLB refill handler (27 instructions).
> Synthesized TLB load handler fastpath (39 instructions).
> Synthesized TLB store handler fastpath (39 instructions).
> Synthesized TLB modify handler fastpath (38 instructions).
> PID hash table entries: 1024 (order: 10, 4096 bytes)
> Using 399.994 MHz high precision timer.
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 208000k/212992k available (2027k kernel code, 4988k reserved,
> 472k data, 108k init, 0k highmem)
> Real Time Clock base address = bf000000
> Mount-cache hash table entries: 512
> NET: Registered protocol family 16
> Time: MIPS clocksource has been installed.
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
> TCP: Hash tables configured (established 8192 bind 8192)
> TCP reno registered
> DS1511 Real Time Clock Driver v1.1
> io scheduler noop registered
> io scheduler deadline registered (default)
> Serial: MPSC driver $Revision: 1.00 $
> mpsc_drv_probe: Adding MPSC 0
> ttyMM0 at MMIO 0xbc008000 (irq = 52) is a MPSC
> natsemi dp8381x driver, version 2.1, Sept 11, 2006
>   originally by Donald Becker <becker@scyld.com>
>   http://www.scyld.com/network/natsemi.html
>   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
> natsemi eth0: NatSemi DP8381[56] at 0x19000000 (0000:01:00.0),
> 00:07:34:02:33:00, IRQ 8, port TP.
> eth1: reset did not complete in 2000 usec.
> natsemi eth1: NatSemi DP8381[56] at 0x19001000 (0000:01:01.0),
> 00:07:34:02:33:01, IRQ 9, port TP.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> pd6729: Cirrus PD6729 PCI to PCMCIA Bridge at 0x18000000 on irq 0
> pd6729: PCI_COMMAND_MEMORY enabled by firmware.
> pd6729: Enabling PCI_COMMAND_MASTER.
> pd6729_pci_probe: io resource start = 0x18000000 end = 0x18000003
> pd6729_pci_probe: mem resource start = 0x0 end = 0x0
> pd6729: ISA irqs = 10,11  polling status changes.
> pd6729_pci_probe: io resource start = 0x18000000 end = 0x18000003
> pd6729_pci_probe: socket[0].io_base = b8000000
> pd6729_pci_probe: socket[0].io_base = 00000000
> pd6729_pci_probe: io resource start = 0x18000000 end = 0x18000003
> pd6729_pci_probe: socket[1].io_base = b8000000
> pd6729_pci_probe: socket[1].io_base = 00000000
> pd6729_pci_probe: socket 0 interrupt reg = 0x0
> pd6729_pci_probe: socket 1 interrupt reg = 0x0
> pd6729_pci_probe: dev cap reg = 0x21
> pd6729_pci_probe: timer 835392c8 set for 1000 jiffies
> pcmcia: parent PCI bridge I/O window: 0x18000000 - 0x187fffff
> adjust_io: start=0x18000000, end=0x187fffff
> adjust_io: probe_io = 1
> cs: IO port probe 0x18000000-0x187fffff: clean.
> pcmcia: parent PCI bridge Memory window: 0x18800000 - 0x19ffffff
> pd6729_set_io_map: socket 0 io->start=0x0, io->stop=0x1,
> io->flags=0x0, map=0
> pd6729_set_io_map: socket 0 get ioctl = 0x0
> pd6729_set_io_map: socket 0 set ioctl = 0x0
> pd6729_set_io_map: socket 0 io->start=0x0, io->stop=0x1,
> io->flags=0x0, map=1
> pd6729_set_io_map: socket 0 get ioctl = 0x0
> pd6729_set_io_map: socket 0 set ioctl = 0x0
> pd6729[0]: chip revision 2 Cap 2
> pcmcia: parent PCI bridge I/O window: 0x18000000 - 0x187fffff
> adjust_io: start=0x18000000, end=0x187fffff
> adjust_io: probe_io = 1
> cs: IO port probe 0x18000000-0x187fffff: clean.
> pcmcia: parent PCI bridge Memory window: 0x18800000 - 0x19ffffff
> pd6729_set_io_map: socket 1 io->start=0x0, io->stop=0x1,
> io->flags=0x0, map=0
> pd6729_set_io_map: socket 1 get ioctl = 0x0
> pd6729_set_io_map: socket 1 set ioctl = 0x0
> pd6729_set_io_map: socket 1 io->start=0x0, io->stop=0x1,
> io->flags=0x0, map=1
> pd6729_set_io_map: socket 1 get ioctl = 0x0
> pd6729_set_io_map: socket 1 set ioctl = 0x0
> pd6729[1]: chip revision 2 Cap 2
> pd6729_get_status: socket 0 IO card STATUS 0x9e, INTCTL 0x60
> pd6729_get_status: socket 0 extended defs: 0x0
> pd6729_get_status: socket 0 data=0x0, value=0x4c0
> pd6729_get_status: socket 0 IO card STATUS 0x9e, INTCTL 0x60
> pd6729_get_status: socket 0 extended defs: 0x0
> pd6729_get_status: socket 0 data=0x0, value=0x4c0
> pd6729_get_status: socket 0 IO card STATUS 0x9e, INTCTL 0x60
> pd6729_get_status: socket 0 extended defs: 0x0
> pd6729_get_status: socket 0 data=0x0, value=0x4c0
> i2c /dev entries driver
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> NET: Registered protocol family 30
> drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> pd6729_get_status: socket 1 IO card STATUS 0x9e, INTCTL 0x60
> pd6729_get_status: socket 1 extended defs: 0x37
> pd6729_get_status: socket 1 data=0x37, value=0x4c0
> pd6729_get_status: socket 1 IO card STATUS 0x9e, INTCTL 0x60
> pd6729_get_status: socket 1 extended defs: 0x37
> pd6729_get_status: socket 1 data=0x37, value=0x4c0
> pd6729_get_status: socket 1 IO card STATUS 0x9e, INTCTL 0x60
> pd6729_get_status: socket 1 extended defs: 0x37
> pd6729_get_status: socket 1 data=0x37, value=0x4c0
> pd6729_get_status: socket 0 IO card STATUS 0xff, INTCTL 0x60
> pd6729_get_status: socket 0 extended defs: 0x0
> pd6729_get_status: socket 0 data=0x0, value=0x1c0
> pd6729_get_status: socket 0 IO card STATUS 0xef, INTCTL 0x60
> pd6729_get_status: socket 0 extended defs: 0x0
> pd6729_get_status: socket 0 data=0x0, value=0x1c0
> pccard: PCMCIA card inserted into slot 0
> cs: memory probe 0x18800000-0x19ffffff: excluding
> 0x18f80000-0x19ffffff nonstatic_find_mem_region: alloc_res returned 0
> pcmcia: registering new device pcmcia0.0
> nonstatic_find_io_region: s_data->io_db={io_db={base=0x0, num=0x0,
> next=8369ec80}}
> nonstatic_find_io_region: s_data->io_db={io_db={base=0x18000000,
> num=0x800000, next=8369ed0c}}
> nonstatic_find_io_region: calling pci_bus_alloc_resource to find
> 00000000
> nonstatic_find_io_region: res->start=0x18000010, res->end=0x1800001f
> pd6729_set_io_map: socket 0 io->start=0x18000010, io->stop=0x1800001f,
> io->flags=0x5, map=0
> pd6729_set_io_map: socket 0 get ioctl = 0x0
> pd6729_set_io_map: socket 0 set ioctl = 0x2
> CPU 0 Unable to handle kernel paging request at virtual address
> d000001e, epc == 83154018, ra == 83153ffc
> ide_probe+0x428/0x570 ide_probe+0x40c/0x570
> Modules linked in:
> [<83154018>] ide_probe+0x428/0x570
> [<8315a924>] pcmcia_device_probe+0xd0/0x1bc
> [<83139548>] really_probe+0x80/0x1a8
> [<83138478>] bus_for_each_drv+0x64/0xcc
> [<8313986c>] device_attach+0xac/0xd4
> [<83138354>] bus_attach_device+0x30/0x8c
> [<83136ae4>] device_add+0x610/0x794
> [<8315b3e8>] pcmcia_device_add+0x1f8/0x3a0
> [<8315b6bc>] pcmcia_card_add+0xc0/0x184
> [<8315b868>] ds_event+0xe8/0x118
> [<83154724>] send_event+0xcc/0x110
> [<83154e14>] socket_insert+0xe0/0x1c0
> [<83155924>] pccardd+0x314/0x31c
> [<83039154>] kthread+0xe8/0x130
> [<83004930>] kernel_thread_helper+0x10/0x18
> eth0: DSPCFG accepted after 0 usec.
> eth0: link up.
> eth0: Setting full-duplex based on negotiated link capability.
> pd6729_get_status: socket 1 IO card STATUS 0xff, INTCTL 0x60
> pd6729_get_status: socket 1 extended defs: 0x37
> pd6729_get_status: socket 1 data=0x37, value=0x1c0
> pd6729_get_status: socket 1 IO card STATUS 0xef, INTCTL 0x60
> pd6729_get_status: socket 1 extended defs: 0x37
> pd6729_get_status: socket 1 data=0x37, value=0x1c0
> pccard: PCMCIA card inserted into slot 1
> cs: memory probe 0x18800000-0x19ffffff: excluding
> 0x18800000-0x1897ffff 0x18f80000-0x19ffffff
> nonstatic_find_mem_region: alloc_res returned 0
> IP-Config: Complete:
>       device=eth0, addr=10.2.10.2, mask=255.255.0.0, gw=10.2.0.1,
>      host=eng131, domain=, nis-domain=(none),
>      bootserver=10.0.0.23, rootserver=10.0.0.23, rootpath=
